Environment Monitoring System

Environmental monitoring systems prevent hardware damage to server rooms, data centers and network closets with critical condition alerts and remote reboot capability.

Also known as: remote SNMP environment monitoring system, monitor server rooms, data center monitoring, computer room, network closet, temperature sensor, remote power reboot, web alert thermometers, server room monitoring.

Network diagram of ENVIROMUX™ Server Environment Monitoring System Environmental threats in your server room can cause a lot more damage than hardware or software problems. Redundant hardware, backup tapes, UPS battery arrays, generators and other fault-tolerance measures can all be rendered useless if your server room overheats or floods. Don't ignore environmental threats – remotely manage them with an ENVIROMUX® Server Environment Monitoring System or Intelligent Power Distribution Control Unit via TCP/IP Ethernet protocol over CAT5 through an RJ45 connector.

Monitor Temperature The most common environmental threat in any server room or wiring closet is heat. Detect critical rises or drops in temperature, and receive notifications when heating problems occur.

Monitor Humidity Detect abnormal humidity conditions. You define the humidity levels that are appropriate for each sensor's environment.

Detect the Presence of Water Whether it's a tripped sprinkler system or a flash flood, a server room or wiring closet is just about the last place you want to see water. Receive notification as soon as water makes an appearance.

Monitor Physical Security Monitor "dry-contact" devices including motion sensors, door sensors, vibration sensors and smoke detectors.

Control Power Remotely reboot and control power (on/off) to servers and network devices.


Enterprise Environment Monitoring Systems
Small Enterprise Environmental Monitoring System
Small Enterprise Environment Monitoring System

$445 - $595

Part #: E-2D

The E-2D supports 2 external configurable sensors, 5 digital inputs, and 1 output relay for control of external devices. It features 2 USB ports for USB modem, USB flash drive, or USB LCD screen. Linux inside.

Medium Enterprise Environmental Monitoring System
Medium Enterprise Environmental Monitoring System

$615 - $1,010

Part #: E-5D

The E-5D supports 5 external configurable sensors, 5 digital inputs, 2 output relays for control of external devices. The system also includes two internal sensors: temperature and humidity. It features 4 USB ports for USB modem, USB flash drive, or USB LCD screen. Linux inside.

Large Enterprise Environmental Monitoring System
Large Enterprise Environmental Monitoring System

$1,315 - $1,890

Part #: E-16D

The E-16D supports 16 external configurable sensors, 8 digital inputs, and 4 output relays for control of external devices. The system also includes three internal sensors: temperature, humidity and power. It features 4 USB ports for USB modem, USB flash drive, or USB LCD screen. Linux inside.

Sensors & Accessories for Enterprise Environment Monitoring Systems
Self-Hosted Enterprise Environment Monitoring System Management Software
Self-Hosted Enterprise Environment Monitoring System Management Software

$500 - $2,860

Part #: E-MNG-SH

E-MNG-SH is a self-hosted software program that provides an easy-to-use, unified interface for monitoring and configuring up to 3,000 E-2D/5D/16D,
E-MICRO-TRH(P), E-1W(P) units and all connected sensors and output relays via Ethernet. The software is installed on a Windows-based server/computer. Users can access from anywhere using a web browser on a computer, smartphone, and/or tablet. No clients or special apps to install.

 
Low-Cost Environment Monitoring Systems
Micro Environment Monitoring System
Micro Environment Monitoring System / Remote Temperature/Humidity Sensor over IP

$225 - $365

Part #: E-MICRO

The E-MICRO-T features an integrated temperature sensor, 2 RJ45 temperature/humidity sensor ports & 2 dry contact inputs. The E-MICRO-TRHP features an integrated temperature/humidity sensor, 2 RJ45 temperature/humidity sensor ports, 2 dry contact inputs & built-in Power over Ethernet (PoE). Use independently or as an IP-connected remote sensor for the E-2D/5D/16D.

Environment Monitoring System with 1-Wire Sensor Interface / Remote Sensor over IP
Low-Cost Environment Monitoring System - Supports up to 24 Temperature Sensors

$200 - $275

Part #: E-1W

The E-1W features two digital inputs sensitive to contact closure and two RJ11 connectors for daisy-chaining many 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination. Available with optional Power over Ethernet (PoE). Use independently or as an IP-connected remote sensor for the
E-2D/5D/16D.

Sensors & Accessories for Micro Environment Monitoring System Sensors & Accessories for Environment Monitoring System with 1-Wire Sensor Interface
Self-Hosted Enterprise Environment Monitoring System Management Software
Self-Hosted Enterprise Environment Monitoring System Management Software

$715 - $2,860

Part #: E-MNG-SH

E-MNG-SH is a self-hosted software program that provides an easy-to-use, unified interface for monitoring and configuring up to 3,000 E-2D/5D/16D,
E-MICRO-TRH(P), E-1W(P) units and all connected sensors and output relays via Ethernet. The software is installed on a Windows-based server/computer. Users can access from anywhere using a web browser on a computer, smartphone, and/or tablet. No clients or special apps to install.

Android App for Low-Cost Environment Monitoring Systems – E-MICRO
Android App for E-MICRO Low-Cost Environment Monitoring Systems

$19.95

Part #: E-APP-ANDM

Optional Android App provides an easy-to-use interface for monitoring sensor statuses and acknowledging/dismissing sensor alerts from an unlimited number of E-MICRO units.

Low-Cost Liquid Detection Monitoring System
Single-Zone Liquid Detection System
Single-Zone Liquid Detection System

$170

Part #: E-LDA-LC2

The E-LDA-LC2 Single-Zone Liquid Detection System monitors up to 1,640 feet (500 meters) of liquid/chemical detection sensor cable or an under carpet leak detection sensor.

 
Power Monitoring and Power Control Devices
AC Voltage Detector with Relay
AC Voltage Detector with Relay

$70 - $75

Part #: E-ACVDRLY

The ENVIROMUX® AC Voltage Detector with Relay detects voltage from 50VAC to 250VAC when connected to an environmental monitoring system with dry contact inputs. The internal relay closes when sensing voltage above 60VAC and opens when sensing voltage 55VAC and below.

Secure Remote Power Control Unit with Environmental Monitoring
Secure Remote Power Control Unit with Environmental Monitoring

$520

Part #: IPDU-S2

The ENVIROMUX® Secure Remote Power Control Unit allows you to remotely reboot and control power (on/off) to up to two servers or other powered devices from any location via secure web interface, RS232, SSH, or Telnet.

Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet & 2 Digital Inputs/Outputs
Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet & 2 Digital Inputs/Outputs

$185 - $210

Part #: PWR-RMT-RBT-C13

The Remote Power Reboot Switch is used to remotely reboot and control power (on/off) to a server or other powered device over IP. It features two digital inputs to monitor alarm contacts, environmental sensors, relays, and switch closures; and two digital open collector outputs for control of external devices.

Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets

$205

Part #: PWR-RMT-RBT2-515R-LCV2

The 2-Port Remote Power Reboot Switch allows you to remotely reboot and control power (on/off) to up to two servers or other powered devices over IP.