IPDU-S2 SECURE REMOTE POWER REBOOT SWITCH FIRMWARE RELEASE NOTES Last Update 2019/11/08 This listing provides the version number of the NTI IPDU-S2 Secure Remote Power Reboot Switch firmware file, the date of the release, and a summary of the changes in that release. 1.9 2019/11/08 Feature Add: Adds the ability to power OFF(and remain OFF) or power ON (and remain ON) power outlets associated with IP Device alerts. These features are in addition to being able to power cycle (power OFF, then back ON) associated power outlets. 1.8 2018/11/05 Bug Fix: Corrects a problem with IP Filters not working after a power cycle or reboot. 1.7 2018/05/08 Feature Change: Upgrades the security for better browser support and custom x509 certificates. -Provides the option to disable ICMP and weak ciphers. Bug Fix: Corrects a problem with the inability to change the IP address of a unit using the Discovery tool. (This occurs when the IPDU-S2 is set to use a DHCP server) 1.6 2018/03/29 Change: Changes the default HTTP setting to Enabled. 1.5 2014/04/22 Feature Add: Makes DHCP the default network setting. If no DHCP server is found, will revert to the static network settings. Feature Add: Adds advanced LDAP settings for Microsoft Active Directory. Feature Add: Adds the ability to load a custom web server X509 & Client certificate. 1.4 2014/01/14 Added option to operate the output relay remotely using SNMP. MIB file has been updated also. 1.2 2010/01/28 Add configuration option to bootloader to allow faster booting when network cable is not connected Note: To update firmware from version 1.1 or before, the bootloader must also be updated. To do this, contact NTI for assistance. 1.1 2009/11/20 Removed circuit breaker and all references to it. 1.0 2009/10/13 Initial Revision