FIRMWARE RELEASE NOTES
ENVIROMUX-MINI ENVIROMUX-MINI-IND ENVIROMUX-MINI-O
v 1.41 2010/07/09

This listing provides the version number of the NTI ENVIROMUX-MINI Server 
Environment Monitoring System firmware file, the date of the release, and a summary 
of the changes in that release.

1.41            2010/07/09

	Improvement: Adjusted temperature readings in order to compensate for local 
	warming due to the temperature of the sensor case.

1.40            2010/06/09

	Added support for the Safari browser, both Mac and PC 
	Added support for the WAP summary page to be viewed on an iPhone. 
	Bug Fix: Fixes a problem with the cursor not pointing to the user 
		field upon opening of the Login page. 

1.38            2010/01/22
	Bug Fix: Fixes a problem with automatic acknowledgment settings being lost 
		after a reboot when a GSM modem is connected. 
	Bug Fix: Fixes a firmware lockup problem when E-mail addresses are 
		completely removed from within a sensor configuration page. 

1.37            2009/10/08
	Added support for more SNMP trap information including different OIDs for 
		traps sent when returning from alert status. 

	Note: MIB version 1.03 must be used with this firmware if SNMP traps are 
        	configured to be used.   

1.36            2009/09/02
	Added support for NetComm N3GS003 3G Serial Modem(ENVIROMUX-3G)

1.35            2009/08/17
	Added date and time to mobile summary page 
	Added automatic update to the mobile summary page. Update time is based 
		upon the settings on the Administrative > General page
	Improved compatibility with Firefox and Netscape browsers. 

1.34            2009/06/09

	Added compatibility with Firefox and Netscape web browser
	Added WAP-compatible sensor summary page (used in Blackberry)
	Added ability to set maximum number of notifications per alert

1.31            2009/05/08
	Added ability to send SMS alerts via GSM modem 
	Extended the minimum range of temperature sensor for industrial model to -4F 
		(was 32F) 
	Corrected an error in temperature sensor values. 

1.30            2009/01/08
	Added option to have the sensors returned to normal status when alert 
		condition clears, without manually acknowledging/dismissing the alert

1.29 		2007/09/13 
	Fixed issue with sensor readings not being sent via email when 
		configured to do so. 
	Fixed issue where high threshold settings were not updated in
		the SNMP database when they were changed from within 
		the WEB interface. It was requiring that the ENVIROMUX 
		be power-cycled first. 

1.28 		2007/05/23 
	Updated copyright statement. 
	Now showing firmware version number for ENVIROMUX-MINI-IND (industrial 
		version) in Rev x.yy-IND format with the web interface and at 
		power-ON when connected via RS232.

1.27    	2007/05/11
	Added option to enable/disable Daylight Saving Time feature that 
		adjusts clock setting in accordance with new Daylight 
		Saving Time rules (passed in 2005).
	Fixed issue with single \n character in e-mail message body not being accepted 
        by some SMTP servers. It was replaced with \r\n.

1.26    	2007/05/02
	Added support for DHCP server for automatic IP address assignment and made 
        adjustment for Daylight Saving Time automatic.

1.25    	2007/03/05
	Added alert e-mails from sensor that will show the sensor value               
		in addition to the defined message. 
	Added alerts that can be manually simulated from the Configuration  
		page of each sensor. This is intended to be used in the    
		configuration phase for testing (usually to test if e-mails  
		or SNMP traps reach their destinations). 
	Fixed the temperature sensors unit that was always "Celsius" after 
		a power-on when read through SNMP. It required the user to  
		change it, then change it back to fix it.  
	Fixed the OID for system traps that had a different root compared  
		to sensor alert traps (specified in MIB file). Also  
		corrected the OID for the 2nd temperature sensor's trap. 

1.24		2006/12/06
	Added configurable HTTP Server Port option under Network Administration
	Modified appearance of Temperature/Humidity sensor bar graph
	Fixed a bug in Syslog messages where the month was incorrect
		in the time stamp

1.22		2006/06/19
	Fixed issue causing e-mail bodies to be filtered out by some mail servers. 

1.21		2006/04/17
	Fixed bug that caused a crash when a large number (>70) of log 
		entries were deleted. 
	Fixed bug that prevented log overflow notifications from being 
		sent by email.
	Modified humidity equations and fixed minor bugs related to sensor records.
	Fixed bug causing log temperature values to not be adjusted when 
		degree mode was changed.

1.19		2006/04/17
	Added syslog feature.	

1.18		2006/01/19
	Fixed issue causing the administrator name to be filled with erroneous 
        characters after the log filled.	
	Placed email in a separate thread and added a queue for the messages.
	Fixed date/admin password bugs and user login and privilege problems.

1.12		2005/11/23
	Fixed locks on previous version. 

1.05		2005/08/02
	Initial release.