SERIMUX-CS CONSOLE SWITCH ETHERNET CONTROL FIRMWARE RELEASE NOTES serimux-cs-ethernet-control-v1-10-releasenotes, 1.10 2010/05/26 This listing provides the version number of the SERIMUX-CS Console Switch Ethernet control firmware file, the date of the release, and a summary of the changes in that release. 1.10 2010/5/26 Added option for line feed suppression for telnet clients when connected to serial ports. Default setting is suppression enabled. 1.9 2009/06/22 Added support for Command Line Interface (CLI) to control SERIMUX-CS configuration-usable only when Ethernet option is present Updated Support links- “Manual” now opens pdf of manual; “Downloads” now opens webpage with available firmware downloads Added configuration for “Port Authentication type” for security option with port connections direct via Telnet Added support for remote reboot to enable the user to reboot the SERIMUX from a remote location via a network Note: When updating to version 1.9, the Telnet base port number (page 50 of the manual) must be reset to 7000 (or any desired value). The value will be cleared as part of the upgrade. 1.6 2008/01/18 Web interface menus are now easier to navigate. Fixed the lack of a port disconnect being displayed on the web interface when the user is disconnected from the keypad. Fixed the inability to attach/detach a modem using the web interface. Fixed the “serial-user-disconnected” report when the user is disconnected using the web interface. 1.2 2007/11/14 Initial Revision