SPLITMUX-DVI-4RT FIRMWARE RELEASE NOTES
Last Update 2016/12/06

This listing provides the version number of the NTI SPLITMUX-DVI-4RT Advanced Quad Screen Multiviewer
firmware file, the date of the release, and a summary of the changes in that release.

	4.11i	2016/12/06

	This version contains 1 new feature, 3 general improvements and 2 bug fixes.

	Display of Channel Names in All Modes and Indicating the Active Channel 
	
		The display of channel names can be controlled in the OSD window COMPUTER => "NAME 1-4". If enabled it is
		active in all modes.
 
		The display of channel names can be switched on permanently or for durations from 1 to 60 seconds. 
		
		The display of channel names is activated by switching the active channel or switching the mode. Switching
		to a mode or channel that is already active activates the display of channel names again.

		In addition, the active channel is temporarily indicated by a border in Quad mode and in Win mode. The color and
		width of the border is set in SYSTEM => BORDER (the name of the window has been SYSTEM => WIN MODE before). The
		indication of the active channel by a border in Quad mode can be switched off by "Quad channel indication"

		In presentation mode, channel names are not displayed nor is the active channel indicated by a border.

		The factory settings have the display of channel names enabled for 10 seconds, the border width is 0 and 'Quad channel
		indication' is enabled.

		The previously existing OSD window SYSTEM => QUAD has been replaced by the new settings explained above.

	Input Resolution HDTV 1792x1280p60

		Now the video resolution 1792x1280p60 is accepted at the input.

	Compatibility with Touchscreen ekiosk Design Phex

		Now the touch screen ekiosk Design Phex is supported (controller vendor id h222a, product id 1).