Jive Knowledge Base : entry.title


	Welcome

Knowledge Base Home » ... » ST-C5USBV-300 - USB KVM Extenders via CAT5 to 300 ft » Troubleshooting » Document 1677

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1677&categoryID=106

ST-C5USBV-300: Mouse is not working as configured when connected to a MAC.
Author: Administrator, Created on: Dec 7, 2012 2:18 PM

ST-C5USBV-300: Mouse is not working as configured when connected to a MAC.

Issue: Mouse is not working as configured when connected to a MAC.

Cause: ST-C5USBV-300 not operating in MAC mode.

Solution: Check to see if MAC mode LED is illuminated. If not, enable MAC mode with the following:

Enter Command Mode by simultaneously pressing the left and right <Shift> keys on the keyboard connected to the Remote Unit. The keyboard LEDs will illuminate.
If a MAC CPU is connected, press the <m> key. The keyboard LEDs will momentarily flash and the “MAC” LED on the Remote Unit will illuminate to indicate MAC Mode is ON.