Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES		 CONSOLE
SWITCHES		 KVM
SPLITTER		 VIDEO
SWITCHES		 VIDEO MATRIX
SWITCHES		 VIDEO
SPLITTER		 EXTENDERS
via CAT5		KVM
DRAWERS		MONITORS &
ACCESSORIES		 SERVER
ENVIRONMENT		 VIDEO
CONVERTERS		CABLES &
ADAPTERS


Knowledge Base Home » ... » E-5D » Troubleshooting » Document 1811

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1811&categoryID=132


E-5D: Cannot access ENVIROMUX user interface with Ethernet connection via Telnet
Author: Administrator, Created on: Mar 4, 2013 2:38 PM

E-5D: Cannot access ENVIROMUX user interface with Ethernet connection via Telnet

Issue: Cannot access ENVIROMUX user interface with Ethernet connection via Telnet.

Cause: Telnet not enabled.

Solution: Enable Telnet through web interface.

  1. Via the web interface, select the “Network Configurations” page.

  2. Under “Server Settings,” place a checkmark in the box “Enable Telnet.” The default Telnet setting is “disabled.”

OR

Cause: Cable not wired correctly.

Solution: Check that cables are wired pin-to-pin (1 to 1, 2 to 2, etc.)

OR

Cause: Cable is faulty.

Solution: Substitute with known good patch cable.