Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES		 CONSOLE
SWITCHES		 KVM
SPLITTER		 VIDEO
SWITCHES		 VIDEO MATRIX
SWITCHES		 VIDEO
SPLITTER		 EXTENDERS
via CAT5		KVM
DRAWERS		MONITORS &
ACCESSORIES		 SERVER
ENVIRONMENT		 VIDEO
CONVERTERS		CABLES &
ADAPTERS


Knowledge Base Home » ... » E-5D » Troubleshooting » Document 1815

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1815&categoryID=132


E-5D: Beacon not illuminating
Author: Administrator, Created on: Mar 4, 2013 2:42 PM

E-5D: Beacon not illuminating

Issue: Beacon not illuminating.

Cause: Wires are not connected properly.

Solution: Check wire connections.

OR

Cause: Beacon in use is improperly rated.

Solution: Make sure Beacon is rated at 12VDC, 180mA or less.

OR

Cause: Sensor is not configured to power ON beacon.

Solution: Check sensor configuration. Ensure Beacon is selected under “Alert Notifications.”