Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES		 CONSOLE
SWITCHES		 KVM
SPLITTER		 VIDEO
SWITCHES		 VIDEO MATRIX
SWITCHES		 VIDEO
SPLITTER		 EXTENDERS
via CAT5		KVM
DRAWERS		MONITORS &
ACCESSORIES		 SERVER
ENVIRONMENT		 VIDEO
CONVERTERS		CABLES &
ADAPTERS


Knowledge Base Home » ... » Sensors & Accessories » Digital Input/Output Expanders » Document 1981

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1981&categoryID=133


E-5D: How to Control the Digital I/O Expander via SNMP?
Author: Administrator, Created on: May 12, 2014 11:51 AM

E-5D: How to Control the Digital I/O Expander via SNMP?

Locate the OIDs using the MIB files provided in the installation CD or the firmware downloads page.

Ensure that the read-write community name is correctly entered in the ENVIROMUX and the SNMP software. The name is case-sensitive.

The digital inputs (remoteInputNormalValue) for both E-DI16DO16 and E-DI16DOR16 are fixed values and are not writable. The values are closed (0) and open (1). The normal condition (open or closed) has to be configured via the web interface; it is not writable via SNMP.

The open-collector outputs (remoteOutputRelaystatus) for the E-DI16DO16 are writable and their states can be changed via SNMP SET commands.

The output relays (remoteOutputRelaystatus) for the E-DI16DOR16 are writable and their states can be changed via SNMP SET commands.