Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES		 CONSOLE
SWITCHES		 KVM
SPLITTER		 VIDEO
SWITCHES		 VIDEO MATRIX
SWITCHES		 VIDEO
SPLITTER		 EXTENDERS
via CAT5		KVM
DRAWERS		MONITORS &
ACCESSORIES		 SERVER
ENVIRONMENT		 VIDEO
CONVERTERS		CABLES &
ADAPTERS


Knowledge Base Home » ... » Sensors & Accessories » Smoke Detection Sensors » Document 2034

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=2034&categoryID=190


E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working?
Author: Administrator, Created on: Jul 18, 2017 1:09 PM

E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working?

The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on.

If the sensor is functioning properly:

To reset the sensor, wait till the smoke has dissipated and power cycle the sensor through the web interface. If the alert persists, there is still residue smoke in the sensor; wait a while before power cycling the sensor again.

Acknowledge the alert on the E-MICRO from testing the sensor in order to receive future alerts.