Welcome

ST-C5KVM-600: No video on monitor.

Issue: No video on monitor.

Cause: One or more video cables is loose or disconnected.

Solution: Check all video cable connections.

OR

Cause: No power to Remote or Local Units.

Solution: Make sure yellow LEDs are illuminated for local and remote by checking the following:

• Outlet is live and AC adapter is plugged-in.

• 9V DC jack is fully connected.

• Keyboard is properly connected (only for local units supporting two remote users).

OR

Cause: Video Cable was not attached when CPU was booted.

Solution: With all the cables properly connected, reboot the CPU.

OR

Cause: CATx cable was not connected.

Solution: Check cable connections. Ensure cables are properly and completely snapped-in, then reboot the CPU.