Welcome

E-MINI-LXO: Unable to connect via telnet

Issue: Unable to connect to the E-MINI-LXO via telnet.

Cause: Telnet service not enabled.

Solution: Enable telnet service.

• Via the web interface, select the “Network Configurations” page.

• Under “Server Settings,” place a checkmark in the box “Enable Telnet.” The default telnet setting is “disabled.”

OR

• Via the Command Line interface from a terminal program, issue the following:
  telnet<ENVIROMUX hostname or IP address>

• <ENVIROMUX hostname> is the hostname configured in the workstation where the telnet client will run (through /etc/hosts or DNS table). It can also be just the IP address of the ENVIROMUX (default is 192.168.1.23).

• Input username and password to connect to the ENVIROMUX.