Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES		 CONSOLE
SWITCHES		 KVM
SPLITTER		 VIDEO
SWITCHES		 VIDEO MATRIX
SWITCHES		 VIDEO
SPLITTER		 EXTENDERS
via CAT5		KVM
DRAWERS		MONITORS &
ACCESSORIES		 SERVER
ENVIRONMENT		 VIDEO
CONVERTERS		CABLES &
ADAPTERS


Knowledge Base Home » ... » E-16D » Troubleshooting » Document 1586

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1586&categoryID=93


E-16D: Sensor connected to DIGITAL IN terminal stops working
Author: Administrator, Created on: Oct 26, 2012 11:06 AM

E-16D: Sensor connected to DIGITAL IN terminal stops working

Issue: Sensor connected to DIGITAL IN terminal stops working.

Cause: Sensor is rated for more current than the terminal can supply. Fuse protecting the port has opened.

Solution: Disconnect failed sensor. Power cycle the unit. Reconnect the sensor, ensuring that its current requirements fall within the connected terminal limitations. Alternatively, avoid powering down the unit by waiting 10 minutes after disconnecting the sensor to reset the internal fuse.