Use the form below to enter your search criteria. By default, all content is searched except for document comments. If you wish to search comments as well as everything else, click "Also Search Comments" below.
[1871]
Comments: 0,
Last Modified: Feb 7, 2018 11:21 AM
- Find Similar
E-LDx-y: How can I test the Liquid Detection Sensor and how often should I test it? We recommend testing your leak detection system at least once a year, although some applications may require more frequent testing. System testing should include the following points: With the system powered up, ensure no alarms are present on the system. If the liquid detection rope is installed
[2085]
Comments: 0,
Last Modified: Jan 31, 2018 10:49 AM
- Find Similar
E-MICRO IP Sensors can be connected to the configuration. This is because IP Sensor configuration can only be done through the E-16D Master unit, which allows for up to eight connected IP Sensors. NOTE: Sensors connected to the E-MICRO units can be monitored on the E-16D Master unit.
[2087]
Comments: 0,
Last Modified: Feb 7, 2018 10:02 AM
- Find Similar
E-2D: How Many E-MICRO Units can be Connected to an E-2D Master/Slave Cascade Configuration When configuring an advanced Master and Slave cascade, a maximum of eight E-MICRO IP Sensors can be connected to the configuration. This is because IP Sensor configuration can only be done through the E-2D Master unit, which allows for up to eight connected IP Sensors. NOTE: Sensors connected to the E
[2086]
Comments: 0,
Last Modified: Feb 7, 2018 11:12 AM
- Find Similar
E-5D: How Many E-MICRO Units can be Connected to an E-5D Master/Slave Cascade Configuration When configuring an advanced Master and Slave cascade, a maximum of eight E-MICRO IP Sensors can be connected to the configuration. This is because IP Sensor configuration can only be done through the E-5D Master unit, which allows for up to eight connected IP Sensors. NOTE: Sensors connected to the E
[2088]
Comments: 0,
Last Modified: Feb 7, 2018 10:34 AM
- Find Similar
E-MICRO: How Many E-MICRO Units can be Connected to an E-xD Master/Slave Cascade Configuration When configuring an advanced Master and Slave cascade, a maximum of eight E-MICRO IP Sensors can be connected to the configuration. This is because IP Sensor configuration can only be done through the E-xD Master unit, which allows for up to eight connected IP Sensors. NOTE: Sensors connected
[1581]
Comments: 0,
Last Modified: Jan 31, 2018 10:45 AM
- Find Similar
E-16D: Beacon not illuminating Issue: Beacon not illuminating. Cause: Wires are not connected properly. Solution: Check wire connections. OR Cause: Beacon in use is improperly rated. Solution: Make sure Beacon is rated at 12VDC, 180mA or less. OR Cause: Sensor is not configured to power ON beacon. Solution: Check sensor configuration. Ensure Beacon is selected
[1582]
Comments: 0,
Last Modified: Jan 31, 2018 10:45 AM
- Find Similar
E-16D: Siren not making noise Issue: Siren not making noise. Cause: Wires are not connected properly Solution: Check wire connections. OR Cause: Siren in use is improperly rated. Solution: Make sure Siren is rated at 12VDC, 180mA or less. OR Cause: Sensor is not configured to power ON siren. Solution: Check sensor configuration. Ensure Siren is selected under
[1815]
Comments: 0,
Last Modified: Feb 7, 2018 11:09 AM
- Find Similar
E-5D: Beacon not illuminating Issue: Beacon not illuminating. Cause: Wires are not connected properly. Solution: Check wire connections. OR Cause: Beacon in use is improperly rated. Solution: Make sure Beacon is rated at 12VDC, 180mA or less. OR Cause: Sensor is not configured to power ON beacon. Solution: Check sensor configuration. Ensure Beacon is selected
[1816]
Comments: 0,
Last Modified: Feb 7, 2018 11:09 AM
- Find Similar
E-5D: Siren not making noise Issue: Siren not making noise. Cause: Wires are not connected properly Solution: Check wire connections. OR Cause: Siren in use is improperly rated. Solution: Make sure Siren is rated at 12VDC, 180mA or less. OR Cause: Sensor is not configured to power ON siren. Solution: Check sensor configuration. Ensure Siren is selected under
[34]
Comments: 0,
Last Modified: Feb 7, 2018 10:57 AM
- Find Similar
Can the E-MINI trigger an external device, such as an alarm system? The sensor ports on the E-MINI are only for receiving signals from an external device and cannot be used for sending signals. However, the E-REMS is capable of triggering an external device through its digital output ports.
[155]
Comments: 0,
Last Modified: Feb 7, 2018 10:57 AM
- Find Similar
How to set Mini Server Environment Monitoring System (E-MINI) to send alert e-mails? To get email alerts you need to configure the sensor. 1. Go to the configuration page of the sensor you want to have send alerts: 2. Ensure the E-mail box is checked. 3. Enter the email address into the "notify addresses" box. 4. Then apply the settings. 5. You can test your settings by selecting "
[102]
Comments: 0,
Last Modified: Feb 7, 2018 10:57 AM
- Find Similar
Can the ENVIROMUX Server Environment Monitoring System retransmit an alert at specific intervals defined by the user? Yes, the ENVIROMUX Server Environment Monitoring System can be set to retransmit an alert until it is acknowledged, at specific intervals defined by the user. This can be set in the alert methods section of the configuration for each sensor. The minimum interval before an alert can
[1891]
Comments: 0,
Last Modified: Jan 31, 2018 10:30 AM
- Find Similar
unit's RJ45 sensor port using up to 500 feet of CAT5/5e/6 cable. Up to 16 additional smoke ... -SDS-CEPA Smoke Detector Sensor (CE) with an included power supply should be connected to the expander using 22-gauge 2-wire sensor cables . The power supply cable comes stripped and tinned ... as there are RJ45 sensor ports available. Other self-powered sensors, such as the E-IMD-P
[1892]
Comments: 0,
Last Modified: Jan 31, 2018 10:40 AM
- Find Similar
unit's RJ45 sensor port using up to 500 feet of CAT5/5e/6 cable. Up to 16 additional smoke ... -SDS-CEPA Smoke Detector Sensor (CE) with an included power supply should be connected to the expander using 22-gauge 2-wire sensor cables . The power supply cable comes stripped and tinned ... as there are RJ45 sensor ports available. Other self-powered sensors, such as the E-IMD-P
[1890]
Comments: 0,
Last Modified: Jan 31, 2018 10:56 AM
- Find Similar
's RJ45 sensor port using up to 500 feet of CAT5/5e/6 cable. Up to 16 additional smoke detectors ... -SDS-CEPA Smoke Detector Sensor (CE) with an included power supply should be connected to the expander using 22-gauge 2-wire sensor cables . The power supply cable comes stripped and tinned; follow ... sensor ports available. Other self-powered sensors, such as the E-IMD-P or E-CMD
