Use the form below to enter your search criteria. By default, all content is searched except for document comments. If you wish to search comments as well as everything else, click "Also Search Comments" below.
[151]
Comments: 0,
Last Modified: Feb 7, 2018 11:26 AM
- Find Similar
Issue: Get false alerts from the internal humidity sensor every 8 hours to 2 weeks. The alarm email is followed by returned to normal email. Cause: In the sensor configuration, the Sample Period and Alert Delay settings are set too short. Solution: For humidity sensor, set the Sample Period to 10 seconds and the Alert Delay to 30 seconds.
[1590]
Comments: 0,
Last Modified: Jan 31, 2018 10:32 AM
- Find Similar
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-16D. The cables are sold separately.
[1597]
Comments: 0,
Last Modified: Jan 31, 2018 11:03 AM
- Find Similar
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-16D. The cables are sold separately.
[1705]
Comments: 0,
Last Modified: Feb 7, 2018 9:47 AM
- Find Similar
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-2D. The cables are sold separately.
[1700]
Comments: 0,
Last Modified: Feb 7, 2018 10:15 AM
- Find Similar
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-2D. The cables are sold separately.
[1839]
Comments: 0,
Last Modified: Feb 7, 2018 11:01 AM
- Find Similar
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-5D. The cables are sold separately.
[1835]
Comments: 0,
Last Modified: Feb 7, 2018 11:17 AM
- Find Similar
E-STHS: How far can the combination Temperature/Humidity sensor be extended? The combination Temperature/Humidity sensor can be extended up to 1,000 feet (305 m) via CAT5/5e/6 cable on the E-5D. The cables are sold separately.
[2127]
Comments: 0,
Last Modified: Apr 18, 2018 12:04 PM
- Find Similar
ENVIROMUX-16D: What is the Meaning of the Digital Input Sensor’s Status Values? When reviewing ... meanings for the values are: 0‐ Not connected: No sensor has been connected to the referenced input. 1‐ Normal: Sensor is connected and operating within the parameter defined by “normal status” for that sensor. 2‐ Prealert: Sensor is connected and has entered alert
[2129]
Comments: 0,
Last Modified: Apr 18, 2018 12:06 PM
- Find Similar
ENVIROMUX-2D : What is the Meaning of the Digital Input Sensor’s Status Values? When reviewing ... meanings for the values are: 0‐ Not connected: No sensor has been connected to the referenced input. 1‐ Normal: Sensor is connected and operating within the parameter defined by “normal status” for that sensor. 2‐ Prealert: Sensor is connected and has entered
[2128]
Comments: 0,
Last Modified: Apr 18, 2018 12:05 PM
- Find Similar
ENVIROMUX-5D: What is the Meaning of the Digital Input Sensor’s Status Values? When reviewing ... meanings for the values are: 0‐ Not connected: No sensor has been connected to the referenced input. 1‐ Normal: Sensor is connected and operating within the parameter defined by “normal status” for that sensor. 2‐ Prealert: Sensor is connected and has entered
[185]
Comments: 0,
Last Modified: Feb 7, 2018 10:54 AM
- Find Similar
Issue: Email alerts are being sent when sensors are in normal status. Cause: "Simulate Alert" box still checked after testing email alerts. Solution: In the Web Interface, click "Monitoring", and click the sensor page causing the alerts. Click the "Configure" button. At the bottom of the configuration page, check if "Simulate Alert" is selected
[1592]
Comments: 0,
Last Modified: Jan 31, 2018 10:40 AM
- Find Similar
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning properly: The sensor's LEDs should be on “Red&rdquo ... sound after the pre-configured alert delay time has elapsed. To reset the sensor, wait till the smoke
[1595]
Comments: 0,
Last Modified: Jan 31, 2018 11:04 AM
- Find Similar
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning properly: The sensor's LEDs should be on “Red&rdquo ... the pre-configured alert delay time has elapsed. To reset the sensor, wait till the smoke has
[1837]
Comments: 0,
Last Modified: Feb 7, 2018 11:03 AM
- Find Similar
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning properly: The sensor's LEDs should be on “Red ... sound after the pre-configured alert delay time has elapsed. To reset the sensor, wait till the smoke
[1833]
Comments: 0,
Last Modified: Feb 7, 2018 11:18 AM
- Find Similar
E-SDS or E-SDS-CE: How can I tell if my smoke detection sensor is working? The smoke detector can be tested by using canned smoke or burning a small piece of cotton near the sensor while it is powered on. If the sensor is functioning properly: The sensor's LEDs should be on “Red ... sound after the pre-configured alert delay time has elapsed. To reset the sensor, wait till the smoke
