Use the form below to enter your search criteria. By default, all content is searched except for document comments. If you wish to search comments as well as everything else, click "Also Search Comments" below.
[1995]
Comments: 0,
Last Modified: Apr 20, 2015 2:48 PM
- Find Similar
SERIMUX-S-x: How many users can simultaneously connect to the same port on a SERIMUX? A maximum of 5 users can be simultaneously connected to the same port. Normal 0 false false false EN-US ZH-CN X-NONE /* Style Definitions
[2016]
Comments: 0,
Last Modified: Jan 15, 2016 4:04 PM
- Find Similar
should be set to "Automatic" mode. Then, users can quickly switch the active audio channel ... SPLITMUX-4K-4RT: How to Independently Switch Audio Independent audio switching can be done in any mode, but independently switching audio via the front panel buttons or IR remote control can only be done in Quad or Custom mode. In order to enable independent audio switching, the audio
[2015]
Comments: 0,
Last Modified: Jan 15, 2016 4:05 PM
- Find Similar
be set to "Automatic" mode. Then, users can quickly switch the active audio channel by simply ... SPLITMUX-HD-4RT: How to Independently Switch Audio Independent audio switching can be done in any mode, but independently switching audio via the front panel buttons or IR remote control can only be done in Quad or Custom mode. In order to enable independent audio switching
[1935]
Comments: 0,
Last Modified: May 20, 2013 10:53 AM
- Find Similar
ST-IPHDMI-2G: What is the Expected Latency When Using A Single Switch or Multiple Switches? The measured encode/decode latency within a single switch is typically 37 milliseconds. When connecting multiple switches together, there may be additional latency depending on the nature of the actual switches used. Each additional switch usually introduces 3-5 milliseconds of additional latency. So
[63]
Comments: 0,
Last Modified: Feb 6, 2009 3:27 PM
- Find Similar
Are you able to change the screen outputs through both the web interface and telnet on the video matrix switches?The VEEMUX® video matrix switches (SM-nXm-15-LCD, SM-nXm-AV-LCD, SM-nXm-C5AV-LCD, and SM-8x4-HDA) are configurable to do both the web interface and telnet at the same time.
[1601]
Comments: 0,
Last Modified: Jan 31, 2018 11:02 AM
- Find Similar
E-16D: Can I adapt communications between the E-16D and a Gigabit network switch? Yes. Most Gigabit switches are 10/100/1000 compatible. When you connect the E-16D to a Gigabit network, the network will configure that port to 100 Mbit speeds.
[1691]
Comments: 0,
Last Modified: Feb 7, 2018 10:17 AM
- Find Similar
E-2D: Can I adapt communications between the E-2D and a Gigabit network switch? Yes. Most Gigabit switches are 10/100/1000 compatible. When you connect the E-2D to a Gigabit network, the network will configure that port to 100 Mbit speeds.
[1823]
Comments: 0,
Last Modified: Feb 7, 2018 11:19 AM
- Find Similar
E-5D: Can I adapt communications between the E-5D and a Gigabit network switch? Yes. Most Gigabit switches are 10/100/1000 compatible. When you connect the E-5D to a Gigabit network, the network will configure that port to 100 Mbit speeds.
[111]
Comments: 0,
Last Modified: Feb 7, 2018 11:35 AM
- Find Similar
Can I adapt communications between the E-SEMS-16 (10/100 Base-T Ethernet port with RJ45 Ethernet connector) and a Gigabit network switch? Yes. Any good quality Gigabit switch is 10/100/1000 compatible. When you connect the E-SEMS-16 to a Gigabit network, the network will configure that port to 100 Mbit speeds.
[157]
Comments: 0,
Last Modified: Feb 7, 2018 11:32 AM
- Find Similar
Issue: E-SEMS-16 locks up when battery voltage drops below 10.7v. Cause: When battery voltage drops below 10.7v, the E-SEMS-16 sends out a battery and power supply alert, which causes the unit to lock up when Firmware version 2.2 or older is installed. Solution: Upgrade to Firmware version 2.3 or newer from http://www.networktechinc.com/download/d-enviro-sems.html
[127]
Comments: 0,
Last Modified: Jan 21, 2009 2:33 PM
- Find Similar
How do I exit the scan mode of the UNIMUX KVM Switch? To exit the scan mode, follow the steps below: For all UNIMUX KVM switch models except UNIMUX-DVI-2, UNIMUX-DVI-4, UNIMUX-USBV-2 and UNIMUX-USBV-2R: Press Ctrl + ` (Accent Key) to enter the command mode. Then press 'Ctrl+S' to exit the scan mode ... -USBV-2R KVM switch models: Press Ctrl + ` (Accent Key) to enter the command mode. Then press
[2017]
Comments: 0,
Last Modified: Jan 15, 2016 4:00 PM
- Find Similar
SPLITMUX-C5HDR-4LC: How to Independently Switch Audio Independent audio switching can only be done in Quad Mode. When in Quad Mode, users can switch between the active audio channel by selecting the desired channel via the front panel buttons or IR remote control. E.g. if input 1 is currently selected and its audio is playing, press input 3 on the front panel or IR remote
[1934]
Comments: 0,
Last Modified: May 20, 2013 10:52 AM
- Find Similar
ST-IPHDMI-2G: Can the Transmitters and/or Receivers be Connected to Another Switch or Hub (Routed)? The transmitters and receivers can be connected to another switch or hub by using TRUNK ports or STACK ports to connected the switches together. It is possible to build large HDMI over IP networks using this support.
[1930]
Comments: 0,
Last Modified: May 20, 2013 10:51 AM
- Find Similar
ST-IPHDMI-2G: What are the Recommended Managed Network Switches with VLAN/IGMP Support for Matrix Switch Applications? Compatible managed network switches are (requires Gigabit for best results): Cisco SG300 Gigabit Series (no stacking) Cisco Catalyst 2960 Gigabit Dell PowerConnect 5400 Series (5424, 5448) Dell PowerConnect 5500 Series (5524, 5524P, 5548, 5548P) Dell PowerConnect
[103]
Comments: 0,
Last Modified: Jan 21, 2009 2:28 PM
- Find Similar
Issue: The mouse malfunctions (skips to the left corner and simulates a click and hold) when a MAC computer attached to a UNIMUX Matrix KVM Switch has its operating system upgraded from a MAC OS X10.3 (Panther) to a MAC OS X 10.4 (Tiger) Solution: Turn on the MAC mode on the UNIMUX Matrix KVM Switch ... +T to access settings. Press M to configure MAC ports. You can configure all or specific ports for MAC
335 results for:
SERIMUX console switch set up windows server 2003,
Displaying results 76 - 90
