Use the form below to enter your search criteria. By default, all content is searched except for document comments. If you wish to search comments as well as everything else, click "Also Search Comments" below.
[1939]
Comments: 0,
Last Modified: Jun 21, 2013 9:23 AM
- Find Similar
;SS SW,01”, where SW is the unit address of the switch. Up to 15 units can be daisy-chained and controlled by RS232. If switch 01 is to activate Autostatus, the following should be entered: SS 01,01 If switch 05 is to activate Autostatus, the following should be entered: SS 05,01 ... UNIMUX-nXm-UHD: How to Receive Switching Notifications via RS232 or Ethernet Using RS232 or Telnet
[61]
Comments: 0,
Last Modified: Feb 6, 2009 3:26 PM
- Find Similar
What is the default IP address for NTI?s VEEMUX Video and Audio/Video Matrix Switches? When trying to access the browser interface on a video or audio/video matrix switch, the default IP address is needed to log into the switch screen. For SM-nXm-15V-LCD, SM-nXm-AV-LCD and SM-8x4-HDA video matrix switch models, the default IP addess is 192.168.1.30 For SM-nXm-C5AV-LCD video matrix switch model, the default
[198]
Comments: 0,
Last Modified: Jan 3, 2011 3:54 PM
- Find Similar
What is the ideal temperature and humidity for my server room? The generally accepted, ideal temperature is between 68 and 74 degrees Fahrenheit (20 to 24 degrees Celsius). When the temperature is between 68 and 74 degrees Fahrenheit (20 to 24 degrees Celsius), the relative humidity should be between 40% and 50%.
[1576]
Comments: 0,
Last Modified: Jan 31, 2018 10:47 AM
- Find Similar
IP address to resolve conflict. Log into unit via USB console. Under “Network Settings ... mask, or other network related restrictions. OR Cause: Just setup DHCP and not connected to a DHCP switch. Solution: Reconfigure the unit to static IP or verify the DHCP server and addresses
[1608]
Comments: 0,
Last Modified: Jan 31, 2018 10:43 AM
- Find Similar
and POP ports are only for receiving email. To enable outgoing email alerts, setup SMTP server and ensure the following: Correct IP address for SMTP server. SMTP port is supported, usually corresponding ... as necessary. Only fill in username and password if required for SMTP server.
[1685]
Comments: 0,
Last Modified: Feb 7, 2018 9:57 AM
- Find Similar
restrictions. OR Cause: Just setup DHCP and not connected to a DHCP switch. Solution: Reconfigure the unit to static IP or verify the DHCP server and addresses available. ... . Log into unit via USB console. Under “Network Settings,” change the IP
[1689]
Comments: 0,
Last Modified: Feb 7, 2018 9:55 AM
- Find Similar
and POP ports are only for receiving email. To enable outgoing email alerts, setup SMTP server and ensure the following: Correct IP address for SMTP server. SMTP port is supported, usually ... or disabled as necessary. Only fill in username and password if required for SMTP server.
[1810]
Comments: 0,
Last Modified: Feb 7, 2018 11:10 AM
- Find Similar
restrictions. OR Cause: Just setup DHCP and not connected to a DHCP switch. Solution: Reconfigure the unit to static IP or verify the DHCP server and addresses available. ... . Log into unit via USB console. Under “Network Settings,” change the IP
[1821]
Comments: 0,
Last Modified: Feb 7, 2018 11:08 AM
- Find Similar
and POP ports are only for receiving email. To enable outgoing email alerts, setup SMTP server and ensure the following: Correct IP address for SMTP server. SMTP port is supported, usually ... or disabled as necessary. Only fill in username and password if required for SMTP server.
[1607]
Comments: 0,
Last Modified: Feb 7, 2018 10:43 AM
- Find Similar
: IMAP and POP ports are only for receiving email. To enable outgoing email alerts, setup SMTP server and ensure the following: Correct IP address for SMTP server. SMTP port is supported, usually ... or disabled as necessary. Only fill in username and password if required for SMTP server
[1609]
Comments: 0,
Last Modified: Feb 7, 2018 11:34 AM
- Find Similar
: IMAP and POP ports are only for receiving email. To enable outgoing email alerts, setup SMTP server and ensure the following: Correct IP address for SMTP server. SMTP port is supported ... server.
[115]
Comments: 0,
Last Modified: Feb 6, 2009 3:20 PM
- Find Similar
Issue: RACKMUX-US17 defaults to 1152x870 screen resolution (instead of its maximum 1280x1024 resolution) after reboot when used with a Sun Fire V240 server with XVR-100 graphics card Cause: The Sun Fire V240 server automatically performs the DDC test to detect the monitor?s default resolution, in this case 1152x870, and starts the graphics session with that resolution. Solution: Change the default
[1969]
Comments: 0,
Last Modified: Mar 17, 2014 3:25 PM
- Find Similar
. Use arrow keys to navigate to the CONSOLE menu and the entry MOUSE, then press ENTER/SELECT to open the MOUSE window. To quickly switch control between the multiple screens of various PCs in a split screen environment using one monitor and one set of keyboard and mouse, apply a checkmark in the box "Enable cross channel switching." Once this feature is enabled, simply move the mouse
[1999]
Comments: 0,
Last Modified: Feb 13, 2024 11:49 AM
- Find Similar
, all slave display windows will be shown as dotted lines. Simply double click on the corresponding slave display window to access a slave unit's settings and configure any changes in display settings ... using the Cascade Settings page on the Web Interface and entering the IP address of each cascaded ... slave unit (IP 3). To go back to a unit that is higher up in the hierarchy, click on the corresponding
335 results for:
SERIMUX console switch set up windows server 2003,
Displaying results 91 - 105
