Network Technologies Inc, Innovators in KVM SolutionsWelcome Return to NTI homepage
KVM
SWITCHES		 CONSOLE
SWITCHES		 KVM
SPLITTER		 VIDEO
SWITCHES		 VIDEO MATRIX
SWITCHES		 VIDEO
SPLITTER		 EXTENDERS
via CAT5		KVM
DRAWERS		MONITORS &
ACCESSORIES		 SERVER
ENVIRONMENT		 VIDEO
CONVERTERS		CABLES &
ADAPTERS


Knowledge Base Home » ... » Sensors » Temperature Sensors » Document 1955

This document was published at: http://information.networktechinc.com/jive/entry.jspa?externalID=1955&categoryID=174


E-MINI-LXO: "Out of Sensor Range" error message when changing temperature readings from Celsius to Fahrenheit.
Author: Administrator, Created on: Nov 25, 2013 1:57 PM

E-MINI-LXO: "Out of Sensor Range" error message when changing temperature readings from Celsius to Fahrenheit.

Issue: "Out of Sensor Range" error message when changing temperature readings from Celsius to Fahrenheit.

Cause: The E-MINI-LXO only reads values as Fahrenheit after the change has been saved. When the numbers are automatically converted into Fahrenheit, the unit is still reading them in Celsius until the change is saved.

Solution: When changing temperature reading unit from Celsius to Fahrenheit, write down the converted Fahrenheit values on a piece of paper. Adjust the input values on the screen to range between -20 and 70. Save the configuration as Fahrenheit—there should be no error message. Key in the previously recorded values and hit "save" again.