Category:
FAQ
Sub-Categories:
0,
Documents:
6,
Last Update:
Apr 5, 2013 12:03 PM
|
What is the default IP address for NTI?s VEEMUX Video and Audio/Video Matrix Switches?
[61]
Last Modified:
Feb 6, 2009 3:26 PM
What is the default IP address for NTI?s VEEMUX Video and Audio/Video Matrix Switches? When trying to access the browser interface on a video or audio/video matrix switch, the default IP address is needed to log into the switch screen. For
|
|
|
|
Are you able to change the screen outputs through both the web interface and telnet on the video matrix switches?
[63]
Last Modified:
Feb 6, 2009 3:27 PM
Are you able to change the screen outputs through both the web interface and telnet on the video matrix switches?The VEEMUX® video matrix switches (SM-nXm-15-LCD, SM-nXm-AV-LCD, SM-nXm-C5AV-LCD, and SM-8x4-HDA) are configurable to do both the web
|
|
|
|
How do I Calculate the BTU Output (Heat Load) of NTI Products?
[82]
Last Modified:
Feb 6, 2009 3:27 PM
How do I Calculate the BTU Output (Heat Load) of NTI Products? To determine the BTU output: 1. Determine the voltage and amp rating of the power supply of the product. This information can usually be obtained from the product documentation or on
|
|
|
|
Can I have video from several sources cycle sequentially on a display at specified intervals of time?
[123]
Last Modified:
Feb 6, 2009 3:27 PM
Can I have video from several sources cycle sequentially on a display at specified intervals of time using the VEEMUX Video Matrix Switch? Yes, use the Scan Mode to have an output port automatically switch from one input port to the next
|
|
|
|
SM-nXm-C5AV-LCD: How Do I to Reset the Size of a SM-nXm-C5AV-LCD Unit?
[162]
Last Modified:
Apr 5, 2013 12:03 PM
SM-nXm-C5AV-LCD: How Do I to Reset the Size of a SM-nXm-C5AV-LCD Unit? 1. On the front panel, press the "Menu" button once. 2. Then, Press and hold the "1", "2", & "3" (in that order until they are all
|
|
|
|
SM-nXm-DVI-LCD: What is the Best Start Up Sequence?
[1897]
Last Modified:
Apr 5, 2013 12:00 PM
SM-nXm-DVI-LCD: What is the Best Start Up Sequence? The best start up sequence is: 1. Turn on monitor and switch 2. Wait for switch to boot This ensures that the PC will see active display when the PC is powered up 3. Turn on PC
|
|
|
|
|
