NTI® - Network Technologies Incorporated

HDMI Fiber Extender SC Multimode 1080p

optical digital extension, remote HDTV, how to

Extend an HDMI display up to 980 feet (300 meters)

Also known as: HDMI Optical Extension, HDMI extender, HDMI digital to multimode fiber,
optical extender, graphic extension modules, fiber optic digital video extender, balun.

HDMI Extender via Two SC Multimode Fiber Optic Cable

XTENDEX® ST-2FOHDMI-SC50 (Remote and Local Unit)

Additional Product Information

Data Sheet (PDF)

Features & Applications

The XTENDEX® HDMI Extender via Fiber Optic Cable locates an HDMI display up to 980 feet (300 meters) away from a video source using two SC multimode fiber optic strands. Each extender consists of a transmitter that connects to a video source and a receiver that connects to a display.

Signal transmission via two-strand multimode SC fiber optic cable – no RF interference.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
Compact and durable design – allowing for easy connection and placement.
Cables can be installed in conduit prior to extender installation.
Cascade two extenders to extend up to 1,965 feet (600 meters).

HDMI features supported:
- Deep Color
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS
- Bandwidth up to 7.8 Gbps
- Support for CEC (consumer electronic control) compatible devices.
HDCP compliant.
Supports the DDC2B protocol.
No software to install.
Laser automatically becomes disabled if fiber cable is broken or removed.
Available with optional Infrared Remote (IR) control – call an NTI product consultant for more information.

Specifications

Connectors (for transmitter and receiver):
- One female HDMI connector.
  - Maximum HDMI cable length: 10 feet
- One female 3.5mm port for optional IR emitter/receiver.
- One duplex SC fiber optic port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
Compliant with HDMI 1.3b and HDCP 1.1 standards.

Power

Transmitter and receiver: 110 or 220 VAC at 50 or 60 Hz via AC adapter (US AC adapter included).
Power consumption: 5W (each – transmitter and receiver)
Auto power save mode when source device is powered off.

Cables

Use HDMI-xx-MM cable to connect an HDMI source or display.
Use DVI-HDMI-xx-MM cable to connect a DVI source or display.
Use a duplex SC 50-micron fiber optic cable to extend the receiver from the transmitter up to 980 feet (300 meters).
Cables not included.

Environmental

Operating temperature: 32 to 122°F (0 to 50°C).
Storage temperature: -4 to 158°F (-20 to 70°C).

Dimensions WxDxH (in)

2.95x4.21x1.14 (local and remote unit)

Regulatory Approvals

CE, FCC, RoHS

Warranty

Two years

How to extend a flat panel display up to 980 feet using fiber optic cable