Server Environment Monitoring System Sensors
Humidity temperature sensor, smoke, How To carbon monoxide, liquid moisture detector RJ45
Products » Environmental Monitoring » Small Enterprise Environment Monitoring System » Medium Enterprise Environment Monitoring System & Large Enterprise Environment Monitoring System
Enterprise Environment Monitoring System Sensors & Accessories
Temperature / Humidity / Air Flow Sensors & Accessories compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D
Temperature & Humidity | Liquid & Chemical | Smoke | Gas | Air Flow/Velocity | Weather & Outdoor | Accessories
Temperature & Humidity Sensors
Temperature Sensor
ENVIROMUX-STS
- Applications from 32 to 122°F (0 to 50°C).
- Accurate to within ±0.9°F (±0.5°C).
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS486
- Data rate: 96kbps
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Powered by ENVIROMUX-2D/5D/16D.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
Downloads & References
Temperature/Humidity Sensor
ENVIROMUX-STHS
- Applications from 32 to 122°F (0 to 50°C) and 20 to 80% relative humidity.
- Accurate to within ±0.9°F (±0.5°C) and ±5% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS486
- Data rate: 96kbps
- Supports CAT5/5e/6 cable up to 1,000 ft (305 m).(not included)
- Powered by ENVIROMUX-2D/5D/16D.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
Temperature/Wide Range Humidity Sensor
ENVIROMUX-STHS-99
- Applications from 32 to 176°F (0 to 80°C)
- Accurate to within ±2°F (0 to 50°C, ±1°C)
- 20 to 80% relative humidity, ±3%
- 10 to 90% relative humidity, ±4%
- 0 to 99% relative humidity, ±5%
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft (305 m).(not included)
- Powered by ENVIROMUX-2D/5D/16D
- Regulatory approvals: CE, RoHS
Humidity Sensor
ENVIROMUX-SHS
- Applications from 20 to 80% relative humidity at temperatures between 32 and 104°F (0 to 40°C).
- Accurate to within ±5% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- RJ45 connector.
- Voltage Supply: 5VDC
- Current Consumption: 20mA
- Communication type: RS486
- Data rate: 96kbps
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Powered by ENVIROMUX-2D/5D/16D
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
Downloads & References
Precision Humidity Sensor
ENVIROMUX-SHS-PLT
- NIST traceable calibration accurate to within ±1% from 10 to 80% relative humidity at 77 to 95°F (25 to 35°C).
- Two-point field calibration.
- Output: 4-20 mA DC = 0 to 100% RH.
- Requires the ENVIROMUX-S420MA-24V to operate.
Downloads & References
Precision Temperature/Humidity Sensor
ENVIROMUX-STHS-PLT-x
- Available temperature ranges:
- ENVIROMUX-STHS-PLT-120: 20 to 120°F (-6 to 48°C).
- ENVIROMUX-STHS-PLT-140: -20 to 140°F (-28 to 60°C).
- ENVIROMUX-STHS-PLT-180: 30 to 180°F (-1 to 82°C).
- Accuracy:
- ENVIROMUX-STHS-PLT-120: ±1.5°F (±0.9°C)
- ENVIROMUX-STHS-PLT-140: ±2.4°F (±1.4°C)
- ENVIROMUX-STHS-PLT-180: ±2.3°F (±1.3°C)
- NIST traceable calibration accurate to within ±1% from 10 to 80% relative humidity at 77 to 95°F (25 to 35°C).
- Uses a platinum RTD for precision temperature compensation.
- Sensing element: 1000 W platinum; 2 lead resistance thermometer, .00385 TCR.
- Two-point field calibration.
- Output: 4-20 mA DC = 0 to 100% RH.
- Requires the ENVIROMUX-S420MA-24V to operate.
Downloads & References
Wall and Duct Mount Temperature/Humidity Sensors
ENVIROMUX-STHS-WLM and ENVIROMUX-STHS-DCT
- Combines excellent stability with easy installation and reliable operation.
- Wall Mount ENVIROMUX-STHS-WLM: Applications from 23 to 131°F (-5 to 55°C)
- Duct Mount ENVIROMUX-STHS-DCT: Applications from 14 to 140°F (-10 to 60°C)
- Temperature accurate to within ±0.54°F (±0.3°C)
- Relative Humidity accurate to better than ±3% from 10 to 90% relative humidity at 68°F (20°C).
- Insensitive to dust and most chemicals.
- Requires the ENVIROMUX-S420MA-24V to operate.
- Regulatory Approvals: CE, RoHS
- Enclosure: IP65, NEMA 4
Pipe Temperature Sensor
ENVIROMUX-STSP-xx
- Mount to the outside of a thin walled steel, copper, or aluminum pipe (up to 1/4" wall).
- Copper contact transmits surface temperature to thermal sensor.
- Weatherproof enclosure designed to IP67 specifications.
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±1.0°F (±0.5°C).
- Response time: <1 minute for temperature changes of ±2°F.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- MTBF: 1,942,123 hrs.
- Self centering mounting bracket available for 1-3" (25 mm) diameter pipe, and 3-6.5" (76 mm) diameter pipe (included).
- Included adjustable cable ties secure mounting bracket to pipe.
- Available lengths for attached CAT5e cable: 1/10/50/100/200/400/600/800/1000 feet.
- Powered by ENVIROMUX-2D/5D/16D.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
Downloads & References
Back to Top
Liquid & Chemical Detection Sensors
Low-Cost Liquid Detection Sensor, Rope-Style
ENVIROMUX-LD-LCx-y
- For warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
Liquid Detection Sensor, Plenum Rope-Style
ENVIROMUX-LDx-y
- For warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Regulatory approvals: CE, RoHS
- Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation
- ENVIROMUX-CLP10-LD includes 10 clips
Downloads & References
Chemical Detection Sensor
ENVIROMUX-CDx-y
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid (98%)
- Sulfuric acid (50%)
- Hydrochloric acid (37%)
- Sodium hydroxide (10%)
- Aqua regia
- Ethylene glycol (60% in DI water)
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation
- ENVIROMUX-CLP10-LD includes 10 clips
Under Carpet Leak Detector
ENVIROMUX-UCLD-x
- Use to detect conductive fluids and moisture under carpets.
- 100% waterproof electronics.
- Dimensions WxH: 1.75x0.06" (44.45x1.59 mm).
- Available 2-wire plenum cable lengths: 10/25/50/100/200/400/600/1000 feet.
- Regulatory approvals: RoHS.
Tape-Style Liquid Detector
ENVIROMUX-TLD-x
- For warning of flooding.
- Uses a self-adhesive sensor tape with copper fiber electrodes and a durable netted cover for dependable detection of conductive liquids.
- Continuous tape integrity self-check.
- Weather resistant enclosure.
- Floor or under-pipe mounting.
- Available tape sensor lengths: 10/25/50/100 feet.
- Powered by ENVIROMUX-2D/5D/16D.
Downloads & References
Spot Liquid Detector, Point Leak Detection Sensor
ENVIROMUX-LD-SPDT
- For warning of flooding.
- Features gold-plated probes and microchip technology for dependable detection of conductive liquids.
- SPDT alarm contacts
- Weatherproof enclosure
- LEDs for power and alarm indication
- Ideal solution for sensing leaks under a raised computer floor or air conditioning drip pans.
- Use in large-scale network control centers, data centers, server rooms/closets, unattended remote shelters, mechanical equipment rooms, sensitive areas with overhead piping, industrial process control rooms, etc.
- Adjustable detection level.
- Probe height adjustable 0" to 1.5" (0 to 38mm)
- Dimensions WxDxH: 3.75x4.5x4.23 in (95x114x107 mm)
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE
Downloads & References
Compact-Size Spot Liquid Detector, Point Leak Detection Sensor
ENVIROMUX-SLDO-14
- Use to detect fluids in confined areas, such as condensation drip pans.
- SPDT alarm contacts
- One generic relay output
- No exposed metal sensing posts – nothing to rust or corrode
- Potted electronics — functions when submerged in water
- Adjustable detection level.
- Probe height adjustable 0" to 0.75" (0 to 19mm)
- Dimensions WxDxH: 1.55x1.0x2.0 in (39x25x51 mm)
- Cable length: 14 feet
- Includes 24V/0.5A power supply.
- Regulatory approvals: CE, RoHS
Downloads & References
Spot Liquid Detector with Built-In Visual & Audible Alarm
ENVIROMUX-SLDO-A
- Use to detect conductive fluids in confined areas
- Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas.
- SPDT alarm contacts
- Audible alarm signal – continuously on
- 8 red LEDs for visual alarm signal – continuously on
- Green LED for power
- Dimensions WxDxH: 2x3x1.1 in (51x76x28 mm)
- Powered by ENVIROMUX-2D/5D/16D.
- Cable length: 4.8 feet
Downloads & References
Ultrasonic Level Transmitter
ENVIROMUX-ULT
- General purpose, non-contact ultrasonic level transmitter.
- Compact sensor with 2" (51 mm) dead band and beam width optimized for small tanks 49" (1,245 mm) or less.
- Provides two-wire 4-20 mA analog output.
- Includes Fob USB interface tool for configuring the transmitter.
- Ideal for fluid handling and chemical feed applications integrating process or control automation of small tanks mounted on tools, skids or machines.
- Requires the ENVIROMUX-S420MA-24V to operate with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, cFMus
Downloads & References
Legacy Liquid Detection Rope Sensor
ENVIROMUX-LDSx-y
- For warning of flooding.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- 100% waterproof electronics.
- Detects any liquid or moisture, except deionized water.
- RJ45 connector.
- Voltage Supply: 12VDC
- Current Consumption: 20mA
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Plenum rating: CL2P (UL)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Powered by ENVIROMUX-SEMS-16U and SERIMUX-S-x.
- Regulatory approvals: CE, RoHS
- Requires the ENVIROMUX-SEMS-16U and SERIMUX-S-x to operate.
- Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation
- ENVIROMUX-CLP10-LD includes 10 clips
Legacy Chemical Detection Sensor
ENVIROMUX-CDSx-y
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water o Tap water o Sulfuric acid (98%)
- Sulfuric acid (50%)
- Hydrochloric acid (37%)
- Sodium hydroxide (10%)
- Aqua regia
- Ethylene glycol (60% in DI water)
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Powered by ENVIROMUX-SEMS-16U or SERIMUX-S-x.
- Requires the ENVIROMUX-SEMS-16U or SERIMUX-S-x to operate.
- Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation
- ENVIROMUX-CLP10-LD includes 10 clips
Downloads & References
Back to Top
Smoke Detection Sensors
Smoke Detection Sensor – 120VAC Wire-In with Battery Backup
ENVIROMUX-SDS-120V
- For warning of smoke and invisible fire particles.
- Ionization smoke detector.
- Applications from 40°F to 100°F (4°C to 38°C).
- Front loading battery door.
- 9V battery backup (included) in case of power failure.
- Battery run down protection.
- One button design for easy testing and HUSH mode activation control.
- LED indicates four modes of operation: standby condition, alarm condition, alarm memory and hush mode.
- Hush mode: silences false alarms for 8 minutes, or low battery warning for 13 hours.
- Voltage supply: 120VAC.
- Pre-stripped wiring harness with tinned strands
- Audio alarm: 85dB at 10ft.
- Dimensions: 5" diameter x 1.75" depth.
- Dust cover prevents false alarms.
- Tamper resist feature.
- Links with up to 24 devices.
- Max distance between first and last device: 1000ft (305m).
- Alarm memory indicates initiating alarm in interconnected systems.
- Use compatible relay (ENVIROMUX-RLY-SDS120V) for connection to the ENVIROMUX system or other auxiliary warning devices such as external sirens or stairwell lighting.
- ENVIROMUX-RLY-SDS120V includes normally open and normally closed contacts.
- Contact ratings: 10A at 120VAC, 5A at 30VDC.
- Regulatory approvals: UL.
Downloads & References
Smoke Detection Sensor - CE Approved
ENVIROMUX-SDS-CE
- For warning of smoke.
- Photoelectric smoke detector.
- Smoke sensitivity: 0.08-0.14 dB/m.
- Applications from 32 to 122°F (0 to 50°C).
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Maximum cable length: 1,000 ft (305 m)
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
Smoke Detection Sensor - UL Approved
ENVIROMUX-SDS
- For warning of smoke.
- Photoelectric smoke detector.
- Smoke sensitivity: 0.98-2.4%/ft.
- Built-in 135° F (57° C) thermal heat sensor.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Maximum cable length: 1,000 ft (305 m)
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: UL, RoHS
Smoke Detection Sensor - UL Approved, TAA Compliant
ENVIROMUX-SDS-TAA
- For warning of smoke.
- Photoelectric smoke detector.
- Built-in 135° F (57° C) thermal heat sensor.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Voltage Supply: 8-35VDC
- Current Consumption: 200uA
- Alarm Output: Relay (NO)
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: UL
- TAA compliant
Back to Top
Gas Detectors/Sensors
Carbon Monoxide Detector, CO
ENVIROMUX-CMD
- Continuous air monitoring.
- Pre-set alarm points alert at:
- 70 ppm after 60 to 240 minutes
- 150 ppm after 10 to 50 minutes
- 400 ppm after 4 to 15 minutes
- Flush or surface mount.
- Test functionality of electrochemical CO sensing cell.
- Connect to RJ45 or digital input sensor ports.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- LED indicators for operation status and system test.
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: UL
Downloads & References
Carbon Dioxide Sensor, CO2
ENVIROMUX-CO2
- CO2 room sensor for periodically unoccupied areas.
- Measures CO2 in a range of 0 to 2,000 ppm.
- 0 to 5 VDC output.
- Continuous automatic air pressure compensation.
- LED indicators for operation status and system test.
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: RoHS
Downloads & References
Gas Detector — Methane, Butane, Propane
ENVIROMUX-GD-MBP
- Use to detect leaks of combustible gas (methane, propane, butane, acetylene, etc.)
- Choose between two levels of detection:
- First level:
- Detects methane at concentrations in excess of 0.5%.
- Detects propane/iso-butane at concentrations in excess of 0.3%.
- Second level:
- Detects methane at concentrations in excess of 0.8%.
- Detects propane/iso-butane at concentrations in excess of 0.5%.
- First level:
- Continuous air monitoring.
- Audible alarm signal: 94 dB at 1 foot.
- Relay specifications: level selectable, normally open or normally closed, 250V AC, max 5A.
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE
Downloads & References
Back to Top
Air Flow/Velocity Sensors
Air Flow Sensor
ENVIROMUX-AFM
- Reliable mechanical solution for monitoring air flow.
- Reacts to any condition causing insufficient flow of air such as malfunctioning cooling fan, increased friction, or physical blockage.
- Ideal for direct monitoring of a cooling fan, HVAC duct, or under a raised floor.
- Switch contact is closed when air flow is >8.2 ft/s.
- Connection: 2x single strand AWG26, length 18 in.
- Regulatory approvals: RoHS
Downloads & References
Air Velocity Sensor
ENVIROMUX-AV – Connected to Converter ENVIROMUX-S5VDC
- Reliable sensor for measurement of air velocity.
- Requires the ENVIROMUX-S5VDC sensor converter to operate.
- Flow range: 0-10 m (NaN ft)/s
- Accuracy: ±5% of measuring value at 68°F (20°C).
- Dust resistant design.
- Includes mounting hardware.
- Regulatory approvals: CE, RoHS.
Back to Top
Weather & Outdoor Sensors
Outdoor Temperature Sensor
ENVIROMUX-STS-O
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Powered by ENVIROMUX-2D/5D/16D.
- MTBF: 1,942,123 hrs.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
Downloads & References
Wind Speed Sensor/Anemometer
ENVIROMUX-WSS
- Rugged anemometer
- 3-cup rotor pressed on a stainless steel shaft
- Reed switch and magnet providing one pulse per rotation
- Rotor diameter: 5 inches
- Speed range: ~ 3 mph to 125+ mph (~5 kph to over 200 kph)
- Rugged Delrin body with bronze and Rulon bushings
- Flat aluminum mounting bracket with 2 holes. Designed to be mounted on top of a pole or bracket.
- 100 feet of exterior grade wire
Wind Direction Sensor
ENVIROMUX-EWDS
- Balanced wind direction vane with a near-zero friction bearing and a high accuracy magnetic angle sensor to provide precision wind direction.
- Sensor range: full 360 degrees , zero deadband
- Accuracy: ±1.8 degrees
- Resolution: 12 bit or 0.025 degrees
- Directional Vane approximately 8 inches (203 millimeters)
- 3 wire flying leads, 25-feet (7.6-meter)
- Power:
- Supply voltage: 4.5 to 5.5 VDC
- Current: 15 mA typical
- Output: 5 to 95% of input voltage (0.25 to 4.75VDC)
- Requires the ENVIROMUX-S5VDC-5V to operate with ENVIROMUX-2D/5D/16D.
Downloads & References
Barometric Pressure Transmitter
ENVIROMUX-BPT
- Use for determining atmospheric air pressure.
- Pressure range: 20.8 to 32 in Hg (10.2 to 15.7 psi)
- Accuracy: ± 0.14 Hg (±0.07 psi)
- Repeatability: ± 0.03 Hg (± 0.014 psi)
- Pressure Hysteresis: ± 0.02 Hg (± 0.01 psi)
- Long-Term Stability: ± .014 Hg/year (±0.007 psi/year)
- Media compatibility: Clean, dry air and non-corrosive gases
- Output: 4-20mA
- Power requirements: 8-24VDC @ 20 mA
- Max Loop Resistance: Ohms = (V Supply – 8V)/0.02A
- Enclosure Material: Acrylonitrile butadiene styrene
- Dimensions WxDxH: 2.12x3.12x1.78 in (54x79x45 mm)
- Operating temperature: 32 to 140°F (0 to 60°C)
- Requires the ENVIROMUX-S420MA-24V to operate with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE
| Cable gauge | Max distance |
|---|---|
| 20 AWG | 30,000 feet |
| 22 AWG | 18,000 feet |
| 24 AWG | 11,000 feet |
| 26 AWG | 7,000 feet |
| 28 AWG | 4,000 feet |
Back to Top
Sensor Accessories
4-20mA Sensor Converter
ENVIROMUX-S420MA-24V
- External RJ45 device monitors up to two 4-20 mA analog sensors
- Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
- Provides 24VDC, 25mA for each sensor
- Connector: Screw Terminal, 8-position.
- Supports CAT5/5e/6 cable up to 500 ft. (152 m)
- Includes Mounting Hardware
- Powered by ENVIROMUX-2D/5D/16D.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: RoHS.
Downloads & References
5VDC Sensor Converter
ENVIROMUX-S5VDC
- External RJ45 device monitors up to two linear DC sensors, 0VDC ~ 5VDC
- Output for each sensor:
- ENVIROMUX-S5VDC: 12VDC, 25mA
- ENVIROMUX-S5VDC-5V: 5VDC, 15mA
- Connector: Screw Terminal, 8-position.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
- Includes Mounting Hardware
- Powered by ENVIROMUX-2D/5D/16D.
- MTBF: 1,956,288 hrs.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS.
Downloads & References
Sensor Cables
ENVIROMUX-2W-xx
- 2-wire sensor cable.
- Use to connect dry contact sensors to the ENVIROMUX-2D/5D/16D.
- Available lengths (ft): 3/6/10/25/50/100/300/500
- Regulatory approvals: RoHS, UL
Downloads & References
Self-Adhesive Clips for Liquid/Chemical Sensor Rope
ENVIROMUX-CLP10-LD
- Use to prevent sensor rope cable from shifting after installation
- Self-adhesive backing for easy installation
- Material: Nylon
- Quantity: 10 clips
- Compatible with ENVIROMUX-LDSx-y, ENVIROMUX-CDSx-y, ENVIROMUX-LDx-y and ENVIROMUX-CDx-y
