Environment Monitoring System Weather & Outdoor Sensors

Weather & Outdoor Sensors compatible with ENVIROMUX® E-2D, E-5D and E-16D

Weather & Outdoor Sensors

IP65 Outdoor Temperature Sensor

E-STS-O Outdoor Temperature Sensor
E-STS-O
  • Applications from -40 to 185°F (-40 to 85°C).
  • Accurate to within ±0.9°F (±0.5°C).
  • Weatherproof enclosure.
    • IP65-rated water and dust protection.
  • High resistance to external influences on the cable due to digital output signal.
  • Re-calibration is not necessary after initial set-up.
  • Quick release waterproof RJ45 connector.
  • Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
  • Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
  • Powered by E-2D/5D/16D.
  • Current consumption: 14mA @ 5VDC.
  • MTBF: 1,942,123 hrs.
  • Compatible with E-2D/5D/16D.
  • Regulatory approvals: CE, RoHS
  • Compatible with E-FSC Fiber Converter/Extender.
    • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Downloads & References
NTI Part # Price Quote Buy
E-STS-O $74.00

Wind Speed Sensor/Anemometer

E-WSS Wind Speed Sensor/Anemometer
E-WSS

  • Rugged anemometer
  • 3-cup rotor pressed on a stainless steel shaft
  • Reed switch and magnet providing one pulse per rotation
  • Rotor diameter: 5 inches
  • Speed range: ~ 3 mph to 125+ mph (~5 kph to over 200 kph)
  • Rugged Delrin body with bronze and Rulon bushings
  • Flat aluminum mounting bracket with 2 holes. Designed to be mounted on top of a pole or bracket.
  • 100 feet of exterior grade wire
    • Maximum cable length: 1000 ft (305m)
  • Intended for outdoor use where icing is not expected.
Downloads & References
NTI Part # Price Quote Buy
E-WSS $135.00

Barometric Pressure Transmitter

Barometric Pressure Transmitter
E-BPT

2-wire cable max distance
from E-S420MA-24V
Cable gauge Max distance
20 AWG 30,000 feet
22 AWG 18,000 feet
24 AWG 11,000 feet
26 AWG 7,000 feet
28 AWG 4,000 feet

  • Use for determining atmospheric air pressure.
  • Pressure range: 20.8 to 32 in Hg (10.2 to 15.7 psi)
  • Accuracy: ± 0.14 Hg (±0.07 psi)
  • Repeatability: ± 0.03 Hg (± 0.014 psi)
  • Pressure Hysteresis: ± 0.02 Hg (± 0.01 psi)
  • Long-Term Stability: ± .014 Hg/year (±0.007 psi/year)
  • Media compatibility: Clean, dry air and non-corrosive gases
  • Output: 4-20mA
  • Power requirements: 8-24VDC @ 20 mA
  • Max Loop Resistance: Ohms = (V Supply – 8V)/0.02A
  • Enclosure Material: Acrylonitrile butadiene styrene
  • Dimensions WxDxH: 2.12x3.12x1.78 in (54x79x45 mm)
  • Operating temperature: 32 to 140°F (0 to 60°C)
  • Requires the E-S420MA-24V to operate with E-2D/5D/16D.
    • Maximum cable length: 500 ft (152m)
    • Powered by E-2D/5D/16D.
  • Regulatory approvals: CE
  • Compatible with E-FSC Fiber Converter/Extender.
    • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
NTI Part # Price Quote Buy
E-BPT $555.00
E-S420MA-24V $130.00

Back to Top