
	SSH Serial Port Switch, SSH console switch RS232 Remote Presence Management with Secure Shell	Home \| Shop \| About Us \| Contact Us

Clearance: SSH Serial Port Switch

Secure Shell delivers improved security for remote network access to any RS232 device via the Internet

Limited stock. All sales final on clearance items.

Secure Clustering of up to 8 Slave Units

Additional Product Information

Data Sheet (PDF)

Knowledge Base

SERIMUX-SECURE-8-CL (Front & Back)

Features & Applications

The SERIMUXŽ SECURE SSH Console Switch delivers secure control of up to eight serial devices via Ethernet, LAN or dial-up modem connections. It combines the advanced security of Secure Shell v1/v2 128-bit encryption with unlimited access to remote network management, providing optimum system performance and availability. Enhanced WebUI (User Interface) provides an easy-to-use way for system administrators to find the information they need quickly. It provides visibility to all ports on one screen, with point and click capability.

Securely and intelligently monitor and control multiple RS232 network devices.
Provides remote control of servers, switches, routers, LAN/WAN components, power supplies and PBXs through a single interface.
Powerful diagnostic and event management features (data capture, notification and scripting) assist in the quick location of the source of equipment failures and minimize downtime.
Auto Alert provides instant email notification of server or router alarms, for immediate response in critical situations.
Provides fast access--even when the network is down or the operating system locks up.
- In-band management of network devices over wired/wireless LAN.
- Out-of-band management via dial-in access. Supports Dynamic DNS or PPPoE protocols for broadband network connectivity.
- PCMCIA slot for enhanced functionality. Supports many PC cards (Wired/Wireless LAN card, phone-line modem card and Flash Memory card).
Port logging/buffering assists in trouble-shooting failures by using built-in RAM disk or ATA storage card, NFS server or SYSLOG server to save the last 8KB of data output from each device.

1RU rack-mount enclosure allows for space-effective co-location with network hardware.
Supports Windows Server 2003 Emergency Management Services--helps IT/Telco administrators perform emergency recovery tasks when the server is not accessible through the network.
Compatible with OpenSSH Client.
Enhanced security features protect your system:
- Secure Shell (SSH v1/v2) with public key encrypts data to protect against unauthorized users "sniffing" passwords.
- Individual port authentication provides strong user authentication and protection for port access.
- IP filtering has firewall functionality and a configurable list of IP addresses and protocols, allowing the network administrator to set access policies and admit or deny access.
- HTTPS secures browser connections to the console server's web interface.
Supports secure clustering of up to 8 slave units. Allows encrypted access of up to 512 devices connected to multiple master or slave switches.
Easy, user-friendly installation. Configuration can be done over the Internet, via Telnet or SSH.
Simplified cabling. The 8-pin configuration matches all Sun and Cisco RJ45 console port configurations, allowing administrators to use CAT5 cabling without pin-out concerns.
SUN Solaris safe.

Specifications
Compatibility Supports any device with an RS232 serial port. Serial Interface Eight RJ45 EIA-232 serial port connectors. One RJ45 EIA-232 console port connector. Use CAT5 Ethernet cable for console access to Sun Netra/Cisco equipment. Flow Control: Hardware RTS/CTS Software XON/XOFF Signals: RS232 Rx, Tx,, RTS, CTS, DTR, DSR, GND. Modem controls: DTR/DSR and RTS/CTS. Data transfer rate up to 230Kbps. Network Interface One 10/100 Base Ethernet with RJ45 Ethernet connector. Supports static and dynamic IP address. PC Card One PCMCIA interface slot supports any of the following: CompactFlash storage card. Wireless LAN adapter (802.11b). Ethernet LAN adapter. PSTN/CDMA modem card. Clustering Supports NAT-based efficient and secure clustering. Access up to 8 slave units. Power 110 or 220 VAC at 50 or 60 Hz via IEC connector. Regulatory Approvals CE, UL 1950, FCC Class A, MIC.	Protocols ARP, IP/ICMP. TCP, Telnet, SSH v1/v2. DNS, Dynamic DNS. HTTP, HTTPS, SMTP, DHCP. PPPoE. SNMP v1 & v2 (MIB II). RIP, Static routing. Memory 64MB SDRAM. 8MB Flash. Logging & Buffering Deliver system log messages to NFS, syslog server, ATA Flash memory. Store port buffer data to NFS, syslog server, ATA Flash memory. Supports the flexible buffer size management according to the media and the application. Email alarm notification from the port alarm messages. Package Includes: SERIMUX SECURE Console Serial Switch Mounting Kit included with 8 and 32 port models. RJ45 diagnostic loop back. DB-25F to RJ45 console adapter. DB-9F to RJ45 console adapter. DB-25M to RJ45 console adapter. DB-25M to RJ45 modem adapter. 6 Ft. CAT5 cable. 6 Ft. power supply. User Manual. Environmental Operating temperature: 41°F to 122°F (5°C to 50°C) Storage temperature: -20°F to 140°F (-30°C to 60°C)
Control Methods	Security
Web, Telnet/SSH, System console port. Supports Linux command line interface for power users. Firmware: Downloadable through Telnet or system console. Full-featured system status display via LED indicators: CPU - Power. Ethernet - In-Use/ PCMCIA/ Link/Act/100 Base Each Serial Port - Serial Ready/Rx/Tx.	User access control to the system and the ports. User Level Management: Root, Admin, Port Admin, User. SSH v1/v2 with public key support. RADIUS, LDAP, TCACS+ and Kerberos authentication protocols. IP filtering for the system and ports.
Rackmount Kit Option	Downloads
SERIMUX-SECURE-8-CL with Optional Rackmount Kit SERIMUX-RK-8	The SERIMUX SECURE Console Switch provides secure access to attached devices by using an SSH client instead of Telnet. Download an SSH client program. To download the SSH file, click on the putty.exe file download for your OS. Firmware Downloads: V1.3.2.1 - 32 port version V1.3.2.1 - 16 port version V1.3.2.1 - 8 port version