|
Temperature/Humidity Combination Sensor |
Temperature Sensor |
|
- For use with ENVIROMUX-MINI.
- Applications from 32°F to 104°F (0ºC and 40ºC) and 20% to 80% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±1.35°F (±0.75ºC) and ±5% relative humidity.
- Re-calibration is not necessary after initial set-up.
- Available lengths: 3/7/10/25 feet.
- Includes mounting hardware.
- Regulatory approvals: CE, FCC, RoHS
|
|
- For use with ENVIROMUX-MINI.
- Applications from 32°F to 104°F (0ºC to 40ºC).
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±1.35°F (±0.75ºC).
- Re-calibration is not necessary after initial set-up.
- Available lengths: 3/7/10/25 feet.
- Includes mounting hardware.
- Regulatory approvals: CE, FCC, RoHS
|
Liquid Detection Sensor |
Door Contact Sensor |
|
- For warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid.
- Puddle: 0.6" diameter.
- Detects liquid depth >0.1".
- Available lengths: 3/7/10/25 feet.
- Regulatory approvals: CE, FCC, RoHS
|
|
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- 2-wire interface.
- Screw terminal.
- Wide actuating gap, approximately 1".
- Dimensions WxDxH (in): 0.5x0.5x2 (Switch), 0.5x0.5x2 (Magnet).
- Regulatory approvals: RoHS
|
Humidity Sensor |
Smoke Detection Sensor |
|
- For use with ENVIROMUX-MINI.
- Applications from 20% to 80% relative humidity at temperatures between 0ºC and 40ºC.
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±5% relative humidity.
- Re-calibration is not necessary after initial set-up.
- Available lengths: 3/7/10/25 feet.
- Includes mounting hardware.
- Regulatory approvals: CE, FCC, RoHS
|
ENVIROMUX-SDS-PA
$130 Buy Now
 Knowledge Base |
- For warning of smoke.
- Built-in 135° F (57° C) thermal heat sensor.
- Includes mounting hardware.
- Photoelectric smoke detector.
- Screw terminal.
- Includes 9V/1A power supply.
- Regulatory approvals: UL
|
Emergency/Panic Button |
Temperature Sensor, Extended Range |
|
- Sends activation signal when button is pressed.
- For normally closed or normally open circuit connections.
- 2-wire interface.
- Screw terminal.
- Dimensions WxDxH (in): 0.4x0.9x3
- Regulatory approvals: RoHS
|
ENVIROMUX-T-IND-xx
$50 - $105 Buy Now |
|  |
|
- For use with ENVIROMUX-MINI-IND.
- Applications from 32°F to 167°F (0ºC and 75ºC).
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±2.25°F (±1.25ºC).
- Re-calibration is not necessary after initial set-up.
- Available lengths: 3/7/10/25 feet.
- Dimensions WxDxH (in): 2x2.5x1
- Includes mounting hardware.
- Regulatory approvals: CE, FCC, RoHS
|
Tamper Switch |
Air Flow Sensor |
ENVIROMUX-TDS
$8 Buy Now |
- Sends activation signal when tamper switch is released.
- Normally closed contact when depressed.
- Dimensions (in): inner diameter: 0.8, outer diameter: 0.9, height: 2.9
- 2-wire interface.
|
|
- Reliable mechanical solution for monitoring
air flow.
- Reacts to any condition causing insufficient flow of air such as malfunctioning cooling fan, increased friction, or physical blockage.
- Can be used for direct monitoring of a cooling fan.
- Dimensions WxDxH (in): 1.34x.7x.3
- Switch contact is closed when air flow
is >8.2 ft/s.
- Connection: 2x single strand AWG26, length 18 in.
- Regulatory approvals: RoHS
|
Sensor Cables | |
|
- 2-wire sensor cable.
- Use to connect dry contact sensors to the ENVIROMUX-MINI.
- Available lengths (ft): 3/6/10/25/50/100
- Regulatory approvals: RoHS, UL
| |
