|
Local Unit
Video Input
- Female HDMI-A input and output connectors.
- Four female RJ45 ports for video extension; one to each remote unit.
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
- Signal type: HDMI 1.2, HDCP 1.1 compliant.
Cables
- Use HDMI-xx-MM cable to connect an HDMI source or display.
- CAT6 UTP solid 550 MHz or better cable with TIA/EIA-568B wiring terminated with standard RJ45 connectors is recommended for 1080p applications (not included).
- Maximum extension is 150 feet using CAT7 solid 600 MHz STP cable or CAT6 solid 550 MHz cable.
- Extension distances will vary with the resolution and quality of the cable used.
Power
- 100 or 240 VAC at 50 or 60 Hz via AC adapter.
Dimensions
Warranty
 |
Remote Unit
Remote Unit
- One female HDMI-A port for display.
- One female RJ45 port for receiving high definition video/audio signals and DDC signal.
- Supports HDTV resolutions up to 1080p and computer resolutions up to 1920x1200.
Optional Daisy-Chain Remote Unit
- One-output and three-output daisy-chain models available.
- Enables a daisy chain of five receivers at 1080p / eight receivers at 1080i/720p.
- The three-output receiver supports three displays for a total of 15 displays at 1080p and 24 displays at 1080i.
- ST-C5HDMI-RD-150: one female HDMI-A port for display.
- ST-C5HDMI-RD3-150: three female HDMI-A ports for displays.
- One female RJ45 port for receiving high definition video/audio signals and DDC signal.
- One female RJ45 port for sending high definition video/audio signals and DDC signal.
- Only every third receiver in daisy-chain needs power supply.
Dimensions WxDxH (in)
- ST-C5HDMI-R-150: 2.5x2.8x0.9
- ST-C5HDMI-RD-150: 3.9x3.2x1.4
- ST-C5HDMI-RD3-150: 5x4.7x1.4
Warranty
Warning!
- Never connect the VOPEX-C5HDMI-4, ST-C5HDMI-R-150, ST-C5HDMI-RD-150, or ST-C5HDMI-RD3-150 to an Ethernet card, Ethernet router, hub or switch or other Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet may result.
|
Data Sheet (PDF)