Door Contact Sensor
|
Vibration Sensor |
ENVIROMUX-M-DCS
$6 
|
|
 |
|
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- 2-wire interface.
- Screw terminal.
- Wide actuating gap, approximately 1".
- Dimensions WxDxH (in): 0.5x0.5x2 (Switch), 0.5x0.5x2 (Magnet).
- Regulatory approvals: RoHS
|
|
- For registering movement and shocks.
- Adjustable sensitivity.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft
- Regulatory approvals: RoHS
|
Infrared Motion Sensor |
Ceiling Mount Motion Detector |
|
- Registers movement in the area covered.
- Condition display via LED.
- Provides immunity from common-mode signals such as the effect of strong hot or cold air currents, variation in ambient temperature, background radiation and acoustic noise.
- 24 dual-element detection zones for long, mid and short range protections.
- Surface or corner mounting
- Pulse count or single shot triggering.
- Good RFI protection.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft
- Includes 9V/1A power supply.
- Includes mounting bracket for installing the sensor to a ceiling or wall.
- For use with ENVIROMUX-MINI-LXO only.
- Regulatory approvals: CE, RoHS
|
|
- Detects movement across the detection field.
- 360° detection pattern.
- 113° conical detection angle from ceiling.
- 36' diameter protection when mounted 12' high.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft
- Includes 9V/1A power supply.
- For use with ENVIROMUX-MINI-LXO only.
- Regulatory approvals: CE, RoHS
|
Glass Break Detection Sensor |
Tamper Switch
|
ENVIROMUX-GBS-P
$98  |
- Acoustically detects the cracking of glass.
- Adjustable sensitivity.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft
- Includes 9V/1A power supply.
- For use with ENVIROMUX-MINI-LXO only.
|
ENVIROMUX-TDS
$8
|
- Sends activation signal when tamper switch is released.
- Normally closed contact when depressed.
- Dimensions (in): inner diameter: 0.8, outer diameter: 0.9, height: 2.9
- 2-wire interface.
|
Emergency/Panic Button |
|
ENVIROMUX-EBS
$4 |
|
|
|
- Sends activation signal when button is pressed.
- For normally closed or normally open circuit connections.
- 2-wire interface.
- Screw terminal.
- Dimensions WxDxH (in): 0.4x0.9x3
- Regulatory approvals: RoHS
|
|
|
