Server Environment Monitoring System Sensors temperature humidity, How To
liquid detection, Moisture Detector RJ45
Mini Server Environment Monitoring System Sensors & Accessories
Sensors compatible with ENVIROMUX-MINI-LXO
Temperature & Humidity Sensors
Temperature Sensor
ENVIROMUX-T-xx
- For use with ENVIROMUX-MINI-LXO.
- Applications from 32 to 104°F (0 to 40°C).
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±1.35°F (±0.75°C).
- Re-calibration is not necessary after initial set-up.
- Available lengths: 3/7/10/25 feet.
- Includes mounting hardware.
- Regulatory approvals: CE, RoHS
Downloads & References
Temperature Sensor, Extended Range
ENVIROMUX-T-IND-xx
- For use with ENVIROMUX-MINI-LXO-IND.
- Applications from 32 to 167°F (0 and 75°C).
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±2.25°F (±1.25°C).
- Re-calibration is not necessary after initial set-up.
- Available lengths: 3/7/10/25 feet.
- Dimensions WxDxH: 2x2.5x1 in (51x64x25 mm)
- Includes mounting hardware.
- Regulatory approvals: CE, RoHS
Downloads & References
Temperature/Humidity Combination Sensor
ENVIROMUX-TRH-xx
- For use with ENVIROMUX-MINI-LXO.
- Applications from 32 to 104°F (0 and 40°C) and 20 to 80% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±1.35°F (±0.75°C) and ±5% relative humidity.
- Available lengths: 3/7/10/25 feet.
- Includes mounting hardware.
- Regulatory approvals: CE, RoHS
Downloads & References
Humidity Sensor
ENVIROMUX-RH-xx
- For use with ENVIROMUX-MINI-LXO.
- Applications from 20 to 80% relative humidity at temperatures between 0 and 40°C.
- High resistance to external influences on the cable due to digital output signal.
- Accurate to within ±5% relative humidity.
- Available lengths: 3/7/10/25 feet.
- Includes mounting hardware.
- Regulatory approvals: CE, RoHS
Downloads & References
Back to Top
Liquid & Chemical Detection Sensors
Low-Cost Liquid Detection Sensor, Rope-Style
ENVIROMUX-LD-LCx-y
- For warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600 feet.
- Material: PVC twisted pair with stainless 316 elements
- Diameter: 0.14" (3.5 mm)
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
Liquid Detection Sensor, Plenum Rope-Style
ENVIROMUX-LDx-y
- For warning of flooding.
- 100% waterproof electronics.
- Detects any conductive liquid or moisture.
- Puddle: 0.6" (15 mm) diameter.
- Detects liquid depth >0.1" (2.5 mm).
- Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
- Available 2-wire plenum cable (y) lengths: 5/10/20/50/100 feet.
- Plenum rating: CL2P (UL)
- Diameter: 0.25 in (6.35mm)
- Regulatory approvals: CE, RoHS
- Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation
- ENVIROMUX-CLP10-LD includes 10 clips
Downloads & References
Chemical Detection Sensor
ENVIROMUX-CDx-y
- For detecting the presence of chemical liquid.
- Reliably senses acids, bases, and other conductive liquids.
- Detects liquid depth >0.1" (2.5 mm).
- Minimum puddle: 0.6" (15 mm) diameter.
- Chemical resistant – cable functions normally after seven-day exposure to:
- Fresh deionized water
- Tap water
- Sulfuric acid (98%)
- Sulfuric acid (50%)
- Hydrochloric acid (37%)
- Sodium hydroxide (10%)
- Aqua regia
- Ethylene glycol (60% in DI water)
- Available chemical sensor cable (x) lengths: 1/10/50/100 feet.
- 100% waterproof
- Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
- Contact an NTI product consultant for cable lengths over 100 feet (30 meters) – supports up to 1,000 feet (305 meters).
- Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation
- ENVIROMUX-CLP10-LD includes 10 clips
Back to Top
Smoke & Carbon Monoxide Detectors/Sensors
Smoke Detection Sensor - CE
ENVIROMUX-SDS-CEPA
- For warning of smoke.
- Photoelectric smoke detector.
- Smoke sensitivity: 0.08-0.14 dB/m.
- Applications from 32 to 122°F (0 to 50°C).
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Maximum cable length: 1,000 ft (305 m)
- Includes 12V/1A power supply.
- Regulatory approvals: CE, RoHS
Downloads & References
Smoke Detection Sensor - UL
ENVIROMUX-SDS-PA
- For warning of smoke.
- Photoelectric smoke detector.
- Smoke sensitivity: 0.98-2.4%/ft.
- Built-in 135°F (57°C) thermal heat sensor.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Maximum cable length: 1,000 ft (305 m)
- Includes 12V/1A power supply.
- Regulatory approvals: UL, RoHS
Carbon Monoxide Detector
ENVIROMUX-CMD-P
- Continuous air monitoring.
- Pre-set alarm points alert at:
- 70 ppm after 60 to 240 minutes
- 150 ppm after 10 to 50 minutes
- 400 ppm after 4 to 15 minutes
- Flush or surface mount.
- Test functionality of electrochemical CO sensing cell.
- Connect to RJ45 or digital input sensor ports.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- LED indicators for operation status and system test.
- Includes 12V/1A power supply.
- For use with ENVIROMUX-MINI-LXO only.
- Regulatory approvals: UL
Downloads & References
Back to Top
Sensor Accessories
Sensor Cables
ENVIROMUX-2W-xx
- 2-wire sensor cable.
- Use to connect dry contact sensors to the ENVIROMUX-MINI.
- Available lengths (ft): 3, 6, 10, 25, 50, 100
- Regulatory approvals: RoHS, UL
Downloads & References
Self-Adhesive Clips for Liquid/Chemical Sensor Rope
ENVIROMUX-CLP10-LD
- Use to prevent sensor rope cable from shifting after installation
- Self-adhesive backing for easy installation
- Material: Nylon
- Quantity: 10 clips
- Compatible with ENVIROMUX-LD-LCx-y ENVIROMUX-LDSx-y, ENVIROMUX-CDSx-y, ENVIROMUX-LDx-y and ENVIROMUX-CDx-y
