Server Environment Monitoring System Sensors
How To Detect Motion, Intrusion, Vibration,
Glass Breaks, Door Contact, Digital Keypad
Products » Environmental Monitoring » Small Enterprise Environment Monitoring System » Medium Enterprise Environment Monitoring System & Large Enterprise Environment Monitoring System
Server Environment Monitoring System Sensors & Accessories
Motion / Intrusion / Vibration Sensors & Accessories compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D
Door Contact, Vibration & Glass Break | Motion | Access Control | Emergency/Panic | Light Intensity | Accessories
Door Contact, Vibration & Glass Break Detection Sensors
Door Contact Sensor
ENVIROMUX-M-DCS
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- 2-wire interface.
- Screw terminal.
- Maximum cable length: 1,000 ft
- Wide actuating gap, approximately 1".
- Dimensions WxDxH (in): 0.5x0.5x2 (Switch), 0.5x0.5x2 (Magnet).
- Operating temperature: 32 to 158°F (0 to 70°C).
- Regulatory approvals: RoHS
Downloads & References
Rugged Door Contact Sensors
ENVIROMUX-DCSR
- Monitors access with a magnetic bridge sensor (no special inserts necessary).
- Ideal for commercial and industrial installations in harsh environments.
- Heavy-cast aluminum housing with 18-inch stainless steel armored cable.
- Floor-mounting hardware included.
- Universal-style magnet option has a smaller width and depth that provides greater installation flexibility.
- For normally open or normally closed circuit connection.
- Wide actuating gap, approximately 3".
- Maximum cable length: 1,000 ft (305 m).
- Dimensions WxDxH (in):
- ENVIROMUX-DCSR:
- Magnet: 3.5x1.5x1.5 (89x38x38 mm)
- Switch: 3.5x1.5x0.44 (89x38x11 mm)
- ENVIROMUX-DCSR-U:
- Magnet: 3.13x0.81x2.13 (79x21x54 mm)
- Switch: 3.5x1.5x0.44 (89x38x11 mm)
- ENVIROMUX-DCSR:
- Regulatory approvals: UL.
Downloads & References
Vibration Sensor
ENVIROMUX-VSS
- For registering movement and shocks.
- Adjustable sensitivity.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Regulatory approvals: RoHS
Downloads & References
Fence Vibration Sensor
ENVIROMUX-FENCE1
- Detects when individuals climb over or cut through chain link or wire mesh fences.
- Advanced built-in signal processor prevents false alarms.
- Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
- Two open-collector outputs – alarm and power failure.
- UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
- Rated NEMA 4X and UL94 5V.
- Use individually or chain units with each ranging from 40 to 60 feet away.
- Includes mounting brackets for installing the sensor to fence fabric.
- Screw terminals.
- Operating temperature: -4 to 131°F (-20 to 55°C).
- Operating voltage: 9-15V DC.
Downloads & References
Glass Break Detection Sensor
ENVIROMUX-GBS
- Acoustically detects the cracking of glass.
- Adjustable sensitivity.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Powered by ENVIROMUX-2D/5D/16D.
Back to Top
Motion Detector Sensors
Infrared Motion Sensor
ENVIROMUX-IMD
- Registers movement in the area covered.
- Condition display via LED.
- Provides immunity from common-mode signals such as the effect of strong hot or cold air currents, variation in ambient temperature, background radiation and acoustic noise.
- 24 dual-element detection zones for long, mid and short range protections.
- Surface or corner mounting
- Pulse count or single shot triggering.
- Good RFI protection.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Powered by ENVIROMUX-2D/5D/16D.
- Includes mounting bracket for installing the sensor to a ceiling or wall.
- Regulatory approvals: CE, RoHS
Outdoor Infrared Motion Sensor
ENVIROMUX-IMD-O
- Outdoor weatherproof - high reliability against water and insects
- Double conductive shielding to eliminate false alarms from light sources
- Registers movement in the area covered: 40 ft (12 m) x 50 ft (15 m) - 120° wide
- LED lights during detection
- Selectable detection paterns: Multi-Level (40 zones) or Pet Alley (18 zones)
- Unwanted detection areas can be eliminated using the included area masking strips
- Selectable Sensitivity: High, Mid and Low
- Adjustable to the brightness of surrounding environment with the Day/Night Mode switch
- Tamper switch opens when cover is removed
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: -4 to 122°F (-20 to 50°C)
- IP54 compliant
- Powered by ENVIROMUX-2D/5D/16D.
High-Mount Outdoor Infrared Motion Sensor
ENVIROMUX-IMD-OHM
- High-mount outdoor weatherproof sensor with 94 detection zones.
- Unique pyro-element provides multiple pattern detection and accurate discrimination function for spot temperature changes of moving objects.
- Drastically reduces false and missed alarms caused by severe outdoor environmental changes.
- Upper and lower area must be activated to generate an alarm condition.
- Summer night compensation, advanced temperature compensation, and vegetation sway analysis logic.
- Ideal detection area setting – adjustable length/spot detection.
- Registers movement in area covered: 13/18/30/40 ft and 85° wide.
- LED indicators for operation and system status.
- Unwanted detection areas can be eliminated using the included area masking seal.
- Mounting height: 8.3 to 10 feet.
- Tamper switch opens when cover is removed.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: -4 to 140°F (-20 to 60°C)
- IP54 compliant.
- Powered by ENVIROMUX-2D/5D/16D.
Downloads & References
Ceiling Mount Motion Detector
ENVIROMUX-IMD-CM
- Detects movement across the detection field.
- 360° detection pattern.
- 113° conical detection angle from ceiling.
- 36' (11 m) diameter protection when mounted 12' (3.7 m) high.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
Back to Top
Access Control
Access Control Digital Keypad
ENVIROMUX-ACK
- Two relay outputs controlled by two groups of independent user codes.
- Output 1: 5 Amp relay for door strike
- Output 2: 1 Amp relay for other control applications.
- Normally closed and normally open dry contacts for both output relays.
- Operate with fail-safe or fail-secure locking device.
- Open collector outputs for Duress, Key Active and Inter-lock functions.
- LED indicators for operation status and system status.
- Door open announcer.
- Non-volatile memory in case of power failure.
- Door automatically re-locks after valid access to prevent "tailgate entry".
- User Codes:
- Output 1: 100 user codes.
- Output 2: 10 user codes.
- Powered by ENVIROMUX-2D/5D/16D.
- Dimensions (WxDxH) in: 2.83x1.69x4.57 (72x43x116 mm).
- Regulatory approvals: CE, RoHS.
Downloads & References
Vandal Resistant and Weatherproof Access Control Digital Keypads
ENVIROMUX-ACK-VWT
- Outputs controlled by independent user codes:
- ENVIROMUX-ACK-VWT:
- Output 1: 5 Amp relay for door strike
- Output 2 & 3: 1 Amp relay each for other control applications.
- ENVIROMUX-ACK-VWS:
- Output 1: 5 Amp relay for door strike.
- Output 2 & 3: 24VDC/100mA sink open collector output for other control applications.
- ENVIROMUX-ACK-VWT:
- Normally closed and normally open dry contacts for most relay outputs.
- Operate with fail-safe or fail-secure locking device.
- Extremely long programmable timers for output relays.
- Open collector outputs for Duress, Alarm/Key Active and Inter-lock functions.
- 34 bit Wiegand data output on user code entry.
- Door open announcer.
- LED indicators for operation and system statuses.
- Door automatically re-locks after valid access to prevent "tailgate entry".
- ENVIROMUX-ACK-VWS:
- Door Bell relay output (normally open).
- 50 visitor codes programmable for one time use or a duration of time.
- User Codes:
- Output 1: 1,000 user codes and 50 duress codes.
- Output 2 & 3: 100 user codes and 10 duress codes each.
- Die-casting metal back-lit keyboard with dual brightness levels.
- Dimensions (WxDxH) in:
- ENVIROMUX-ACK-VWT: 4.06x2.76x6.14 (103x70x156 mm)
- ENVIROMUX-ACK-VWS: 3.15x1.97x4.72 (80x50x120 mm)
- Environment and vandal resistant (IP-66).
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE.
RFID Access Control Keypads
ENVIROMUX-ACKR
- Outputs controlled by user codes and/or EM cards.
- ENVIROMUX-ACKR-WDB:
- Output 1: 5 Amp relay for door strike.
- Output 2: 1 Amp relay for other control applications.
- Output 3: 24VDC/100 mA sink open collector output for other control applications.
- ENVIROMUX-ACKR:
- Output 1: 5 Amp relay for door strike.
- Output 2: 1 Amp relay for other control applications.
- ENVIROMUX-ACKR-WDB:
- Normally closed and normally open dry contacts for all output relays.
- Operate with fail-safe or fail-secure locking device.
- Open collector outputs for Duress, Alarm/Key Active and Inter-lock functions.
- Extremely long programmable timers for output relays.
- 24 bit standard Wiegand data on reading of EM cards/keyfobs.
- 34 bit Wiegand data output on user code entry.
- Door open announcer.
- LED indicators for operation and system statuses.
- Door automatically re-locks after valid access to prevent "tailgate entry".
- ENVIROMUX-ACKR-WDB:
- One Door Bell relay contact (normally open).
- Weatherproof (IP-55).
- 50 visitor codes programmable for one time use or a duration of time.
- User Codes:
- ENVIROMUX-ACKR-WDB:
- Output 1: 1,000 user codes and 50 duress codes.
- Output 2 & 3: 100 user codes and 10 duress codes each.
- ENVIROMUX-ACKR:
- Output 1: 1,000 user codes and 50 duress codes.
- Output 2: 100 user codes and 10 duress codes.
- ENVIROMUX-ACKR-WDB:
- Dual brightness back-lit keyboard.
- Dimensions (WxDxH) in:
- ENVIROMUX-ACKR-WDB: 4.61x1.10x4.61 (117x28x117 mm)
- ENVIROMUX-ACKR: 2.83x1.70x4.61 (72x43x117 mm)
- Includes two EM cards and is compatible with all standard 125 Khz proximity EM cards and keyfobs.
- Additional EM cards (ENVIROMUX-RFID-CRD10) and keyfobs (ENVIROMUX-RFID-KYFB10) are available in packs of ten.
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE.
RFID EM Cards/Keyfobs
ENVIROMUX-RFID-CRD10
- Supports additional users for RFID Access Control Keypads.
- Code: 64 bit.
- Function: read only.
- Operating frequency: 125 Khz.
- Modulation: ASK.
- Quantity: 10 cards/keyfobs.
- Dimensions (WxDxH) in:
- ENVIROMUX-RFID-CRD10: 2.09x0.07x3.35 (53.6x1.9x85.2 mm) each.
- ENVIROMUX-RFID-KYFB10: 1.10x0.24x1.38 (28x6.2x35 mm) each.
- Compatible with ENVIROMUX-ACKR and ENVIROMUX-ACKR-WDB.
Electric Strike
ENVIROMUX-EDR-SF
ENVIROMUX-EDR-SCR
ENVIROMUX-EDR-SCR
- Combine with NTI's access control digital keypads or RFID access control keypads to convert a standard cylindrical lock set to an electronic access control locking system with high security and user convenience without a key.
- Fail-Safe Electric Strike (ENVIROMUX-EDR-SF)
- The door is locked with power ON, and unlocked with power OFF.
- For Fire/Emergency door or Escape door installations.
- Fail-Secure Electric Strike (ENVIROMUX-EDR-SCR)
- The door is locked with power OFF, and unlocked with power ON.
- For Entrance door installation.
- Powered by ENVIROMUX-2D/5D/16D.
- Dimensions WxDxH: 1.63x1.38x5.88 in (41x35x149 mm)
- Regulatory approvals: CE
Downloads & References
Key Station
ENVIROMUX-RKS
- Remote key station designed for security system ON-OFF control applications.
- Built with universal connection terminals; can be used freely with most security systems.
- Provides momentary contact with spring return.
- Standard single gang mounting box.
- Built-in tamper switch.
- Built-in connection terminals.
- For security system and door strike applications.
- Powered by ENVIROMUX-2D/5D/16D.
- Dimensions WxDxH: 1.7x2.9x4.6 in (43x74x117 mm)
- Regulatory approvals: RoHS
Downloads & References
Back to Top
Emergency/Panic Button
Emergency/Panic Button
ENVIROMUX-EBS
- Sends activation signal when button is pressed.
- For normally closed or normally open circuit connections.
- 2-wire interface.
- Screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Dimensions WxDxH: 1.7x2.9x4.6 in (43x74x117 mm)
- Regulatory approvals: RoHS
Downloads & References
Back to Top
Light Intensity Sensor
Light Intensity Sensor
ENVIROMUX-LIS
- Detects and measures the luminous intensity of light.
- Ideal for monitoring unmanned closets, telecom rooms, remote data rooms, or other low traffic facilities.
- Applications from 0 to 128,000 lux.
- Human eye response (540 nm peak sensitivity).
- IR and UV rejection
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with ENVIROMUX-2D/5D/16D.
Back to Top
Sensor Accessories
4-20mA Sensor Converter
ENVIROMUX-S420MA-24V
- External RJ45 device monitors up to two 4-20 mA analog sensors
- Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
- Provides 24VDC, 25 mA for each sensor
- Connector: Screw Terminal, 8-position.
- Supports CAT5/5e/6 cable up to 500 ft. (152 m)
- Includes Mounting Hardware.
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: RoHS.
Downloads & References
Sensor Cables
ENVIROMUX-2W-xx
- 2-wire sensor cable.
- Use to connect dry contact sensors to the ENVIROMUX-2D/5D/16D.
- Available lengths (ft): 3/6/10/25/50/100/300/500
- Regulatory approvals: RoHS, UL
