Clearance: VGA Video Matrix Switch: 8x4 & 16x2

Switch video from eight computers among four monitors.

Limited stock. All sales final on clearance items.


VGA Video Matrix Switch - How to switch video from many computers among multiple monitors
VEEMUX® SM-8X4-15V-LCD-DT (Front & Back)
  • Designed and Manufactured in the U.S.A.

The VEEMUX® VGA Video Matrix Switch routes video from many computers to multiple displays (projectors, monitors, etc.) This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors.

Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system.

The VEEMUX® VGA Video Matrix Switch routes video from many computers to multiple displays (projectors, monitors, etc.) This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors.

Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system.


  • Configure and control the switch through serial port, front panel buttons, or optional Infrared remote control.
  • NTI Switch Control Program with Graphical User Interface (GUI control) is included with the product.
  • Equipped with Liquid Crystal Display (LCD) for front panel operation.
  • Switch VGA video directly.
  • Each output provides one video signal.
  • Each input can be independently connected to any or all outputs.
  • Video bandwidth is 200 MHz or greater.
  • Supports 1920x1200 video resolution at a refresh rate of 85 Hz.
  • All units pass vigorous testing with 24 hour minimum burn in, heat testing, and load test of all ports.
  • Available in rackmount or desktop enclosure.
    • Only the 8x4 switch is available in a desktop enclosure.
Video Input
  • Eight female 15-pin HD connectors.
  • Impedance: 75 Ohms.
Video Output
  • Four female 15-pin HD connectors.
  • 1920x1200 video resolution with no degradation.
  • Impedance: 75 Ohms.
  • Bandwidth: 200 Mhz, fully loaded.
Power
  • 110 or 220 VAC at 50 or 60 Hz via AC Adapter.
  • Power consumption: 10W
Dimensions
  • Desktop WxDxH (in): 10x7.7x3.3 (254x196x84 mm)
  • Rackmount WxDxH (in): 19x10x1.75 (483x254x44 mm)
Cables
  • Interface cables between the computers and the switch are required for proper operation.
  • Recommended NTI video cables:
    • VGA interface cable (VEXT-xx-MM).
    • VGA to BNC cable (VINT).
  • Cables not included.
Environmental
  • Operating temperature: 32°F to 100°F (0°C to 38°C).
  • Storage temperature: -20°F to 140°F (-30°C to 60°C).
  • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
  • TAA compliant
Video Input
  • 16 female 15-pin HD connectors.
  • Impedance: 75 Ohms.
Video Output
  • Two female 15-pin HD connectors.
  • 1920x1200 video resolution with no degradation.
  • Impedance: 75 Ohms.
  • Bandwidth: 200 Mhz, fully loaded.
Power
  • 110 or 220 VAC at 50 or 60 Hz via IEC connector.
  • Power consumption: 10W
Dimensions
  • Rackmount WxDxH (in): 19x12x1.75 (483x305x44 mm)
Cables
  • Interface cables between the computers and the switch are required for proper operation.
  • Recommended NTI video cables:
    • VGA interface cable (VEXT-xx-MM).
    • VGA to BNC cable (VINT).
  • Cables not included.
Environmental
  • Operating temperature: 32°F to 100°F (0°C to 38°C).
  • Storage temperature: -20°F to 140°F (-30°C to 60°C).
  • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
  • TAA compliant
Front Panel Interface
  • Standard control method
  • Configuration and control can be done using the front panel buttons.
  • Keypad allows selection of the input source to be routed to the desired outputs.
Infrared Remote Control (Option)
  • Optional control method
  • Transmitter can be up to 50 feet (15 meters) away.
  • Control up to 4 switches with one remote.
  • Power: Two AA batteries (included)
  • Add "-IR" to part number to specify this option.
RS232 Control
  • Standard control method.
  • Configuration and control can be done through the serial port.
  • Baud rate: 1200 through 9600.
  • Address up to 15 units with one serial port.
  • Changes multiple input-to-output connections quickly and efficiently.

Ethernet Control (16x2 Switch Only)
NTI Switch Control Program
  • Supports Microsoft Windows® 95/98/NT/ME/2000/XP/Vista/7/10.
  • Intuitive graphical software provides fast switch control of up to 15 NTI switches using an RS232 connection.
  • Control switches with simple drag-n-drop interfaces.
  • Supports control over daisy-chained configurations.
  • Save and load feature allows frequently used matrix switch configurations to be recalled with the click of a button.
    • Up to nine configurations can be saved/recalled from the switch's internal memory.
  • Automatically displays status for all attached switches each time the program is started.
  • Auto-Update: the view will automatically update when the switch changes configuration.
  • Includes HTML help feature.
  • View and control multiple switches simultaneously with three unique and powerful views:
    • Matrix View
    • Table View
    • Line View

8x4 VGA Video Matrix Switch

NTI Part # Description Price Quote Buy
SM-8X4-15V-LCD-DT-CLR Desktop 8x4 VGA Video Matrix Switch $940.00
$90.00
SM-8X4-15V-LCD-CLR Rackmount 8x4 VGA Video Matrix Switch $1,385
$300.00
SM-16X2-15V-LCD-CLR Rackmount 16x2 VGA Video Matrix Switch $1,350
$270.00
Limited stock. All sales final on clearance items.