Clearance: 4K 18Gbps HDMI Extender Over IP with IR and RS232

The XTENDEX® 4K HDMI 18Gbps Over IP Extender multicasts 4K HDMI 18Gbps digital video and audio signals to one or more receivers up to 328 feet away (100 meters) over a 10-Gigabit Ethernet network using a single CAT6/6a/7 cable.

The extender consists of a local unit that connects to a 4K HDMI source, and a remote unit that connects to a 4K HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CAT6/6a/7 cable, or a Point-to-Many or Many-to-Many connection via a 10-Gigabit network switch. Support for multiple transmitters requires a managed 10GB network switch.

• Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160@30/50/60Hz YUV 4:4:4, and HDTV resolutions to 1080p @120Hz.
  • Extend 4K@60Hz up to 328 feet using CAT6a/7 cable.
    • In a Point-to-Many or Many-to-Many connection, the max length between the switch and the local/remote unit is 164 feet.
  • Extend 1080p@6oHz up to 400 feet using CAT6/6a/7 cable.
    • In a Point-to-Many or Many-to-Many connection, the max length between the switch and the local/remote unit is 200 feet.
  • Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
• HDMI features supported:
  • HDMI 2.0b
  • 10-bit, 12-bit, and 36-bit Deep Color
  • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital+, and LPCM 7.1CH
  • YUV 4:4:4, 4:2:2, and RGB
  • Bandwidth up to 600 MHz (18Gbps)
  • 3D (1080p @60Hz)
  • HDR
• HDCP 2.2 compliant.
• Bi-directional Infrared Remote (IR) control of HDMI source or display. IR transport channel can be forward or backward per the installation.
• Support full-duplex RS232 at 57600 baud.
• Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for managed network switch.)
  • When extending 1080p@120Hz, it is recommended to turn off the video source before connecting the transmitter and receiver.
• Easily expandable – add receivers as you add control stations.
• Use the optional ST-VC-IP4K18GBRS Video Over IP Controller to easily configure/control matrix configurations.
  • Connect to the same network as the transmitters (encoders) and receivers (decoders).
  • Requires a managed 10GB network switch with IGMP snooping.
  • Save up to 16 zone configurations.
    • Configure zones for specific locations/installation sites – for instance, a meeting room.
    • Each zone supports up to 3 preset configurations, and up to 50 transmitter and receiver pairs.
    • Transmitters can be assigned to multiple zones. Receivers are assigned to a single fixed location.
    • In total, each ST-VC-IP4K18GBRS controller can manage 800 transmitter/receiver pairs.