Clearance

The ENVIROMUX® Rugged Door Contact Sensors monitor critical entrances and exits. Compatible with E-2D/5D/16D, E-1W(P) E-MICRO-T(RHP), and
E-MINI-LXO

The ENVIROMUX® Piezo Alarm, emits a loud continuous tone to deter intruders or alert personnel. Compatible with E-2D/5D/16D

The ENVIROMUX® Power Over Ethernet Adapter eliminates the need to place Ethernet-enabled devices near power outlets. Compatible with E-MINI-LXO(B).

The XTENDEX® HDMI Wireless Extender transmits uncompressed digital video and audio signals up to 98 feet over a 60GHz wireless network. Each video extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display.

The XTENDEX® 4K HDMI Extender transmits uncompressed digital Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI signal, IR, RS232, Ethernet, and power up to 230 feet over a single CAT5e/6/7 solid cable.

The XTENDEX® 4K 18Gbps HDMI Extender via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, IR and RS232 up to 3,280 feet (1,000 meters) away from a 4K HDMI source using a single LC singlemode fiber optic strand and 984 feet (300 meters) using multimode fiber optic cable.

The XTENDEX® Low-Cost HDMI Over Gigabit IP Extender multicasts digital video and audio signals to one or more receivers up to 330 feet away over a 1000Base-T Gigabit Network connected with CAT5e/6 cable. Each Low-Cost HDMI Over Gigabit IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. Use with cascaded network switches to extend up to 1,000 feet. Supports Point-to-Point, Point-to-Many, & Many-to-Many connections.

The XTENDEX® 4K HDMI 18Gbps Over IP Extender multicasts 4K HDMI 18Gbps digital video and audio signals to one or more receivers up to 328 feet away (100 meters) over a 10-Gigabit Ethernet network using a single CAT6/6a/7 cable.
The extender consists of a local unit that connects to a 4K HDMI source, and a remote unit that connects to a 4K HDMI display. Supports Point-to-Point, Point-to-Many, & Many-to-Many connections.

The XTENDEX® 4K DisplayPort Active Optical Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 DisplayPort display up to 100 meters (328 feet) from a video source. Using optical fiber, the DP4K21GB-FO-xxM-MM provides high reliability DisplayPort signal transmission with zero signal loss in high noise environments.

The XTENDEX® 4K HDMI Active Optical Cable locates a 4Kx2K HDMI display up to 100 meters (328 feet) from a video source.

The HDMI Fiber Optical Extension Cable transmits video up to 330 feet using an integrated cable solution which includes fiber optic components and DDC signals built into the cable and connectors. Supports resolutions up to 1080p.

The DVI-D Fiber Optical Extension Cable transmits video up to 330 feet using an integrated cable solution which includes fiber optic components and DDC signals built into the cable and connectors. Supports resolutions to 1920x1440. The DVI-D Copper Extension Cable extends a DVI-D display up to 100 feet from a video source. Supports resolutions to 1900x1200.

The XTENDEX® DVI-D Dual Link Extender via Fiber Optic Cable extends a digital flat panel display up to 330 feet away from a DVI-D dual link video source using fiber optic cable. Supports resolutions to 2560x1600.

The XTENDEX® DVI Extender via Multimode Fiber Optic Cable locates a single link digital DVI display up to 3,280 feet away from a computer using multimode fiber optic cable. Supports resolutions to 1920x1200.

The XTENDEX® 2-Port VGA Video Splitter/Extender transmits high-definition VGA video up to 600 feet away from a computer simultaneously to two remote VGA monitors using CAT5/5e/6/6a cables.

The VOPEX® 4K HDMI Splitter/Extender simultaneously distributes uncompressed Ultra-HD 4Kx2K 60Hz 4:2:0 HDMI video, multi-channel audio, and IR from one video source to up to four displays and speakers, each located up to 230 feet away via CAT5e/6 cable.

The VOPEX® Low Cost HDMI Splitter/Extender simultaneously distributes digital video and audio signals from one HDMI video source to up to eight displays, each located up to 150 feet away using a single CAT6 UTP cable.

The Component Video to DVI Converter/Extender converts component video into a DVI signal that can be extended up to 1,640 feet (500 meters) using single-strand multimode SC fiber optic cable.

The 3G-SDI to DVI Converter/Extender converts SD/HD/3G-SDI video into a DVI signal that can be extended up to 1,640 feet (500 meters) using single-strand multimode SC fiber optic cable.

The S-Video/Composite Video to DVI Converter/Extender converts S-video or Composite video into a DVI signal that can be extended up to 1,640 feet (500 meters) using single-strand multimode SC fiber optic cable.

The MultiVideo System Converter allows the user to view computer video on a TV, or view TV/VCR/DVD video on a VGA computer monitor. This multi-format Video Converter also regenerates sync-pulses and can help stabilize weak video signals from multi-generation videotapes.

The INTERMUX® DVI USB KVM on IP™ device is used to control one or many computers locally at the server site or remotely via the Internet using a standard browser. Securely gain BIOS level access to systems for maintenance, support, or failure recovery over the Internet.

The SPLITMUX® DVI/VGA Quad Screen Multiviewer simultaneously displays and monitor video signals (digital DVI or analog VGA) from four different computers and/or video sources on a single analog or digital screen.

The LCD monitor arms and mounting brackets allow effortless height, tilt and rotation adjustment of the monitor by hand. Wall mount and ceiling mount brackets available.

The USB2-C5-LCND492 1-Port USB 2.0 Extender extends one USB device up to 492 feet (150 meter) using CAT5e/6/6a/7 cable. Each extender consists of a local unit that connects to a computer, and a remote unit that connects to a USB device. Supports data rates to 480 Mbps. No drivers required. Multiplatform support: Windows, Mac, Linux.