Products » Environmental Monitoring » Environmental Sensors » Small Enterprise Environment Monitoring System » Medium Enterprise Environment Monitoring System & Large Enterprise Environment Monitoring System
Environment Monitoring System Door Contact Sensors & Contact Switches
Door Contact Sensors compatible with ENVIROMUX® E-2D, E-5D and E-16D
Door Contact Sensors
Door Contact Sensor
E-M-DCS3
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- Wide actuating gap, approximately 1.2".
- Dimensions WxDxH (in): 0.6x0.7x2.5 (switch), 0.6x0.5x2.5 (magnet).
- Life cycle: 100,000 cycles
- Operating temperature: 32 to 158°F (0 to 70°C).
- Regulatory approvals: CE, UL, RoHS
Downloads & References
Door Contact Sensor, TAA Compliant
E-M-DCS5-TAA
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- Actuating gap: up to 1 inch (25 mm).
- Dimensions WxDxH (in):
- Switch: 0.34x0.38x2.00 in (9x10x51 mm).
- Magnet: 0.34x0.38x2.00 in (9x10x51 mm).
- Life cycle: 10,000,000 cycles
- Operating temperature: -67 to 158°F (-55 to 70°C).
- Regulatory approvals: UL
- TAA Compliant.
Downloads & References
Plunger-Style Door Contact Sensor
E-DCS-PS2
- Use to monitor access from sliding doors and windows.
- A captive magnet within the plunger activates a reed switch when the plunger is depressed.
- Plunger travel: 0.25" (6mm)
- Includes mounting hardware.
- For normally closed circuit connection.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D system.
- Maximum cable length: 1,000 ft
- Dimensions: 1.00x1.41x1.75
- Operating temperature: -13 to 158°F (-25v to 70°C)
- Regulatory approvals: UL
Downloads & References
Rugged Door Contact Sensor
E-DCSR-V2
- Monitors access with a magnetic bridge sensor (no special inserts necessary).
- Ideal for commercial and industrial installations in harsh environments.
- Industrial-grade floor-mount switch that is primarily used for the protection of overhead doors where there is operation of heavy motorized traffic.
- Heavy-cast metal housing with 3.06-feet armored cable.
- Floor-mounting hardware included.
- For normally open or normally closed circuit connected.
- Wide actuating gap up to 2.5 inches (63 mm).
- Helps prevent false alarms caused by door movement or damaged and loose fitting doors.
- Connect to digital input on an E-2D/5D/16D.
- Life cycle: 10,000,000 cycles
- Operating temperature: : -67 to 158°F (-55 to 70°C)
- Dimensions WxDxH (in):
- Magnet: 3.86x1.13x0.52 in (98x29x13 mm)
- Switch: 3.5x1.5x0.44 in (89x38x11 mm)
- Regulatory approvals: UL
Downloads & References
Rugged Door Contact Sensor with Universal-Style Magnet
E-DCSR-U
- Monitors access with a magnetic bridge sensor (no special inserts necessary).
- Ideal for commercial and industrial installations in harsh environments.
- Heavy-cast metal housing with 3.06-feet armored cable.
- Floor-mounting hardware included.
- niversal-style magnet option has a smaller width and depth that provides greater installation flexibility.
- For normally open or normally closed circuit connected.
- Wide actuating gap up to 2.5 inches (63 mm).
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- Operating temperature: -40 to 150°F (-40 to 65°C)
- Dimensions WxDxH (in):
- Magnet: 3.13x0.81x2.13 (79x21x54 mm)
- Switch: 3.5x1.5x0.44 (89x38x11 mm)
- Regulatory approvals: UL
Downloads & References
Network Technologies Inc |
 |
