The VEEMUX DVI Video Matrix Switch routes video from up to 32 single link digital DVI video sources (computers, DVD players, satellite receivers, etc.) to up to 32 displays (LCD monitors, Plasma screens, DLP HDTVs, projectors, etc.).
SM-8X8-DVI-LCD
Ethernet Control Firmware Files
SM-8X8-DVI-LCD Firmware Version |
SM-8X8-DVI-LCD Firmware Download |
SM-8X8-DVI-LCD Release Notes |
SM-8X8-DVI-LCD Release Date |
3.0 |
veemux-dvi-v3-0.bin
(7.6 MB) |
veemux-dvi-r
(5 KB) |
2019-05-16 |
Note: To download Firmware updates, right click the update link and select 'Save Link As' or 'Save Target As'. Make sure that the file is saved with the correct file extension.
IMPORTANT NOTE: The update/reboot process can take up to 4 minutes to complete.
If the switch still hasn't fully booted after 4 minutes, or if the web page remains on the updating page for more than 4 minutes, turn the switch off and back on and wait an additional 4 minutes
Use the LEDs on the front panel as indicators for the update process.
- When starting the process, the power and IR activity LEDs will be green.
- Within 1-1:30 minutes into the process, the IR activity LED will turn off and the power LED will turn red.
- Once the update process completes, both LED will be green.
On the rare occasion the unit still doesn't boot after the above steps have been followed, the firmware will need to be
updated through TFTP.
The times listed above are true for the first reboot after code update only. Boot times are normally about 1 minute otherwise.
SM-4X4-DVI-LCD, SM-16X16-DVI-LCD & SM-32X32-DVI-LCD
Ethernet Control Firmware Files
SM-4X4/16X16/32X32-DVI-LCD Firmware Version |
SM-4X4/16X16/32X32-DVI-LCD Firmware Download |
SM-4X4/16X16/32X32-DVI-LCD Release Notes |
SM-4X4/16X16/32X32-DVI-LCD Release Date |
3.5 |
veemux-nxm-dvi-v3-5.bin
(10 MB) |
veemux-nxm-dvi-r (7 KB) |
2019-05-30 |
Note: To download Firmware updates, right click the update link and select 'Save Link As' or 'Save Target As'. Make sure that the file is saved with the correct file extension.
IMPORTANT NOTE: The update/reboot process can take up to 6 minutes to complete.
If the switch still hasn't fully booted after 6 minutes, or if the web page remains on the updating page for more than 6 minutes, turn the switch off and back on and wait an additional 10 minutes.
On the rare occasion the unit still doesn't boot after the above steps have been followed, the firmware will need to be
updated through TFTP.
The times listed above are true for the first reboot after code update only. Boot times are normally about 1 minute otherwise.
Discovery Tool
Discovery Tool Version |
Discovery Tool Download |
Release Date |
1.0 |
discovery.zip
(145 KB) |
2014-01-31
|
USB Drivers for SM-4X4-DVI-LCD
USB Drivers Version |
USB Drivers Download |
Release Date |
1.0 |
veemux-usb-drivers.zip
(16 KB) |
2017-05-02
|