Discontinued. No longer available

DVI Video Splitter/Extender with Audio via CAT5/6/7

Drive up to 4 remote displays and speakers from one DVI video source

Also known as: DVI splitter extender CAT6, DVI video splitters, 4-way HDTV distribution amplifier, 1080p video distribution over CAT6, multiple monitor, multi-channel video port expander, DVI-D hub, extend digital DVI stereo audio to numerous displays speakers, dvi over cat6 protocol.

DVI video/audio splitter
VOPEX-C6DVIA-LA-4 Local Unit (Front & Back) and
ST-C6DVIA-IR-R-300 Remote Unit

Product Highlights

  • Optional support for stereo audio & local monitor
  • No power supplies required for remote units
  • HDMI Extender for use with Digital Signage
  • Designed and Manufactured in the U.S.A.

The VOPEX® DVI Splitter/Extender simultaneously distributes high resolution single link digital DVI video from one video source to up to 4 displays, each located up to 300 feet away using a single CAT5e/6/7 cable.


The VOPEX system consists of two components: the DVI broadcast unit, which connects to the host video source and optionally supplies video to a local display, and a remote unit for each remote display.

The VOPEX® DVI Splitter/Extender simultaneously distributes high resolution single link digital DVI video from one video source to up to 4 displays, each located up to 300 feet away using a single CAT5e/6/7 cable.


The VOPEX system consists of two components: the DVI broadcast unit, which connects to the host video source and optionally supplies video to a local display, and a remote unit for each remote display.

  • Broadcast real-time DVI video to multiple display locations.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1080 and 1920x1200.
    • Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
  • HDCP compliant.
  • Supports the DDC2B protocol.
  • Full IR control of DVI source from remote HDTV using existing source remote control.
  • EDID learning for the support of any DVI display device.
  • Supplies power to the remote units – no additional power supplies required.
  • Optional audio can be broadcast to self-powered stereo speakers at each remote location and optionally to the local unit.
  • Available with optional local access support for local DVI display.
  • Cascade multiple units for more numerous display configurations.
  • Ideal for digital signage, tradeshows, or classrooms where high quality video on multiple monitors is needed.

Local Unit

Video Input
  • Compatible with a computer or HDTV video source (satellite receiver, DVD player, etc) with DVI output.
  • Multiplatform support: Windows 2000/XP/Vista/7, Windows Server 2000/2003/2008, Solaris, Linux, FreeBSD, and MAC OS 9/10.
  • Female DVI-I connector.
    • Signal type: single link digital DVI.
  • HDCP compliant
IR Extension Support
  • One female 3.5 mm port for IR emitter (included).
Optional Video Output
  • Female DVI-I connector.
    • Signal type: single link digital DVI.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 at 60 Hz.
  • HDCP compliant
Optional Stereo Audio
  • One 3.5 mm jack
  • Frequency response: 20 Hz to 20 kHz, ±1dB.
  • Signal-to-Noise Ratio (SNR): 76 dBA.
  • Total Harmonic Distortion and Noise (THD+N): 0.017%.
  • Stereo crosstalk: -70 dB.
  • Input impedance: 10k Ohms.
  • Line level output; supports multimedia speakers.
  • Maximum I/O levels: 3.1Vp-p (line level).
  • CD quality audio output.
Power
  • 110 or 220 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)
Dimensions
  • WxDxH: 7.35x4.98x1.09 in (187x126x28 mm)
Environmental
  • Operating temperature: 32 to 122°F (0 to 50°C).
  • Storage temperature: -20 to 140°F (-30 to 60°C).
  • Operating/storage relative humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
Cables
  • 3-foot (0.91-meter) DVI cable included.
  • 3-foot (0.91-meter) audio cable included with units with audio option.
  • Use DVI-IS-xx-MM cables to connect a DVI source or display.
  • Use DVI-HD-xx-MM cables to connect an HDMI source or display.
  • Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
Warranty
  • Two years

Remote Unit

Video Output
  • Female DVI-I connector.
    • Signal type: single link digital DVI.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 at 60 Hz.
  • HDCP compliant
IR Extension Support
  • One female 3.5 mm port for IR receiver (included).
Optional Stereo Audio
  • One 3.5 mm jack
  • Frequency response: 20 Hz to 20 kHz, ±1 dB.
  • Signal-to-Noise Ratio (SNR): 76 dBA.
  • Total Harmonic Distortion and Noise (THD+N): 0.017%.
  • Stereo crosstalk: -70 dB.
  • Input impedance: 10k Ohms.
  • Line level output; supports multimedia speakers.
  • Maximum I/O levels: 3.1Vp-p (line level).
  • CD quality audio output.
Power
  • Powered from local unit via CAT5/5e/6/6a cable.
Dimensions
  • WxDxH: 3.09x3.49x1.08 in (78x89x27 mm)
Environmental
  • Operating temperature: 32 to 122°F (0 to 50°C).
  • Storage temperature: -20 to 140°F (-30 to 60°C).
  • Operating/storage relative humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
Warranty
  • Two years

Distances & Resolutions for CAT5e/6/6a/7 Cables
Cable Distance (feet) Maximum Resolution
CAT5e Solid UTP 100 1080p/60Hz/8-bit
1080i/60Hz/12-bit
1920x1200/60Hz
150 720p/60Hz/8-bit
1280x1024/60Hz
CAT5e Stranded UTP 100 720p/60Hz
1280x1024/60Hz
CAT6 Solid UTP 50 1080p/60Hz/10-bit
1920x1200/60Hz
75 1080p/60Hz/10-bit
1080i/60Hz/12-bit
1920x1200/60Hz
150 1080p/60Hz/8-bit
1280x1024/60Hz
175 1080p/24Hz
720p/60Hz/8-bit
250 1080p/24Hz
720p/60Hz/8-bit
1360x768/60Hz
300 480p/60Hz/12-bit
800x600/75Hz/8-bit
CAT6a Solid UTP 75 1080p/60Hz/10-bit
1920x1200/60Hz/8-bit
100 1080p/60Hz/10-bit
720p/60Hz/12-bit
1920x1200/60Hz
200 720p/60Hz/10-bit
1360x768/60Hz
300 480p/60Hz/12-bit
800x600/60Hz
CAT7 Solid STP 150 1080p/8-bit
1920x1200/60Hz
200 720p/60Hz/8-bit
1024x768/60Hz
279 720p/60Hz/8-bit
480p/60Hz/12-bit
1024x768/60Hz

Application Drawings

  • DVI Video Splitter/Extender with Audio via CAT5/6/7
    DVI Video Splitter/Extender with Audio via CAT5/6/7 - Application Drawing
    How to Split/Extend high resolution single link digital DVI video from one video source to up to 4 displays

Application Notes

  • How to Cascade Multiple DVI Splitters
    How to Cascade Multiple DVI Splitters
    The VOPEX-C6DVIA-LA-4 can be cascaded for larger configurations. Simply connect the local access "DVI Video Out" and "Audio Out" ports to the "DVI Video In" and "Audio In" ports on another VOPEX-C6DVIA-LA-4 unit to add more remote display connections.