Smoke Detection Sensors compatible with ENVIROMUX® E-MICRO
Smoke Detection Sensors
Low-Cost Smoke Detection Sensor – CE Approved
E-SDS-CELCP-V2
For warning of smoke.
Photoelectric smoke detector.
Smoke sensitivity: 0.5 dB/m ±0.1 dB/m.
Selectable latching feature.
Configure the sensor to auto-reset after an alarm trigger, or require a power cycle to unlatch the trigger.
Features a metal dust deterrent filter – dust/debris accumulates on the surface of the filter, leaving the mesh openings clear for smoke to travel through.
Compatible with E-MICRO.
Interfaces with the E-MICRO via the digital input sensor ports.
Screw terminal:
To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
Smoke Detection Sensor – 120VAC Wire-In with Battery Backup
E-SDS-120V-V2
For warning of smoke and visible fire particles.
Photoelectric smoke detector.
Applications from 40°F to 100°F (4°C to 38°C).
Voltage supply: 120VAC, 60Hz.
Pre-stripped wiring harness with tinned strands
Two AA replaceable batteries – provides power during short-term power outages.
One button design for easy testing and HUSH mode activation control.
LED indicates four modes of operation: standby condition, alarm condition, alarm memory and hush mode.
Hush mode: silences false alarms for 8 minutes, or low battery warning for 13 hours.
Audio alarm: 85dB at 10ft.
Dimensions: 5" diameter x 2" depth.
Alarm memory indicates initiating alarm in interconnected systems.
Use compatible relay (E-RLY-SDS120V) for connection to the ENVIROMUX system or other auxiliary warning devices such as external sirens or stairwell lighting.
E-RLY-SDS120V includes normally open and normally closed contacts.