Environment Monitoring System Smoke Detectors
Smoke Detection Sensors compatible with ENVIROMUX® E-1W
Smoke Detection Sensors
Low-Cost Smoke Detection Sensor – CE Approved
E-SDS-CELCP-V2
- For warning of smoke.
- Photoelectric smoke detector.
- Smoke sensitivity: 0.5 dB/m ±0.1 dB/m.
- Selectable latching feature.
- Configure the sensor to auto-reset after an alarm trigger, or require a power cycle to unlatch the trigger.
- Features a metal dust deterrent filter – dust/debris accumulates on the surface of the filter, leaving the mesh openings clear for smoke to travel through.
- Compatible with E-1W.
- Interfaces with the E-1W via the digital input sensor ports.
- Screw terminal:
- To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Maximum cable length: 1,000 ft (305 m).
- Includes 12V/1A power supply.
- Regulatory approvals: CE, RoHS.
Downloads & References
Smoke Detection Sensor – 120VAC Wire-In with Battery Backup
E-SDS-120V
- For warning of smoke and invisible fire particles.
- Ionization smoke detector.
- Applications from 40°F to 100°F (4°C to 38°C).
- Front loading battery door.
- 9V battery backup (included) in case of power failure.
- Battery run down protection.
- One button design for easy testing and HUSH mode activation control.
- LED indicates four modes of operation: standby condition, alarm condition, alarm memory and hush mode.
- Hush mode: silences false alarms for 8 minutes, or low battery warning for 13 hours.
- Voltage supply: 120VAC.
- Pre-stripped wiring harness with tinned strands
- Audio alarm: 85dB at 10ft.
- Dimensions: 5" diameter x 1.75" depth.
- Dust cover prevents false alarms.
- Tamper resist feature.
- Links with up to 24 devices.
- Max distance between first and last device: 1000ft (305m).
- Alarm memory indicates initiating alarm in interconnected systems.
- Use compatible relay (E-RLY-SDS120V) for connection to the ENVIROMUX system or other auxiliary warning devices such as external sirens or stairwell lighting.
- E-RLY-SDS120V includes normally open and normally closed contacts.
- Contact ratings: 10A at 120VAC, 5A at 30VDC.
- Compatible with E-1W.
- Regulatory approvals: UL.
- Compatible with the E-DI2-1W Digital Input Expander.
Downloads & References
Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved
E-SDS-PA
- For warning of smoke.
- Photoelectric smoke detector.
- Smoke sensitivity: 0.98-2.4%/ft.
- Built-in 135°F (57°C) thermal heat sensor.
- Includes mounting hardware.
- Connect to digital input sensor ports.
- Screw terminal
- To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Maximum cable length: 1,000 ft (305 m)
- Includes 12V/1A power supply.
- Compatible with E-1W.
- Regulatory approvals: UL, RoHS
- Compatible with the E-DI2-1W Digital Input Expander.
Downloads & References
- User Manual
- CAD Drawing
- E-SDS.step – 3D image file
- Knowledge Base
Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved, TAA Compliant
E-SDS-TAA-PV2
- For warning of smoke.
- Photoelectric smoke detector.
- Built-in 135° F (57° C) thermal heat sensor.
- Connect to digital input sensor ports.
- Voltage Supply: 8.5 to 35 VDC
- Max Current Consumption:
- 50uA max standby current @12VDC
- 20mA max alarm current @12VDC
- Alarm Output: Relay (NO)
- Screw terminal
- To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Includes 12V/1A power supply.
- Compatible with E-1W.
- Regulatory approvals: UL
- TAA compliant
Downloads & References
Back to Top
Network Technologies Inc |
 |
