Products

Environment Monitoring System Door Contact, Vibration, & Glass Break Sensors

E-M-DCS3

Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
Can also be used for monitoring side wall and covers.
Includes mounting hardware.
For normally closed circuit connection.
Screw terminal.
- Connect to digital input on an E-1W.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
Wide actuating gap, approximately 1.2".
Dimensions WxDxH (in): 0.6x0.7x2.5 (switch), 0.6x0.5x2.5 (magnet).
MTBF: 100,000 hrs
Operating temperature: 32 to 158°F (0 to 70°C).
Regulatory approvals: CE, UL, RoHS

NTI Part #	Price	Quote	Buy
E-M-DCS3	$7.30

E-M-DCS3-TAA

Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
Can also be used for monitoring side wall and covers.
Includes mounting hardware.
For normally closed circuit connection.
Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-1W.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
Actuating gap: up to 0.75 in (19 mm).
Dimensions WxDxH (in):
- Switch: 0.78x0.56x2.5 in (20x14x64 mm).
- Magnet: 0.63x0.56x2.5 in (16x14x64 mm).
MTBF: 10,000,000 hrs
Operating temperature: -40 to 149°F (-40 to 65°C).
Regulatory approvals: UL
TAA Compliant.
Will ship with either a white or gray case.

NTI Part #	Price	Quote	Buy
E-M-DCS3-TAA	$15.00		Out of Stock

E-DCS-PS2

Use to monitor access from sliding doors and windows.
A captive magnet within the plunger activates a reed switch when the plunger is depressed.
Plunger travel: 0.25" (6mm)
Includes mounting hardware.
For normally closed circuit connection.
Screw terminal.
- Connect to digital input on an E-1W.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
Maximum cable length: 1,000 ft
Dimensions: 1.00x1.41x1.75
Operating temperature: -13 to 158°F (-25° to 70°C)
Regulatory approvals: UL
Compatible with the E-DI2-1W Digital Input Expander.

NTI Part #	Price	Quote	Buy
E-DCS-PS2	$9.00

E-DCSR-V2

E-DCSR-V2: industrial-grade floor-mount switch that is primarily used for the protection of overhead doors where there is operation of heavy motorized traffic.
E-DCSR-UV2: Rugged Door Contact Sensor with Universal Style Magnet can be mounted at various angles for difficult installations.

Helps prevent false alarms caused by door movement or damaged and loose fitting doors.

NTI Part #	Description	Price	Quote	Buy
E-DCSR-V2	Rugged Door Contact Sensor	$60.00
E-DCSR-UV2	Rugged Door Contact Sensor with Universal Style Magnet	$60.00

E-VSSBD

For registering movement and shocks – sensed through surface to which it is mounted.
Trigger duration: 3.1 to 4.1 seconds
2-wire interface.
Screw terminal.
Operating temperature: 32 to 104°F (0 to 60°C)
Storage temperature: -22 to 140°F (-30 to 60°C)
Relative Humidity: 17 to 90% non-condensing RH.
Includes 5V/1A power supply.
Compatible with E-1W.
Mounting bracket included.
Dimensions without bracket WxDxH: 2x2.5x1.28 in (51x64x33 mm)
Dimensions without bracket WxDxH: 3.75x2.5x1.34 in (95x64x34 mm)
Regulatory approvals: CE, RoHS

NTI Part #	Price	Quote	Buy
E-VSSBD	$44.00

E-GBS-P

Acoustically detects the cracking of common framed glass types such as plate, tempered, wired and laminate.
Adjustable sensitivity and digital signal processing for greater detection sensitivity and improved false alarm immunity.
Includes mounting hardware for wall and ceiling.
Detection range: 25 feet.
- Reduced by drapes and/or blinds.
Connect to the digital input sensor ports.
Supports CAT5/5e/6 UTP or STP cables.
Screw terminal
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
Maximum cable length: 1,000 ft (305 m)
Compatible with E-1W.
Includes 12V/1A power supply.
Compatible with the E-DI2-1W Digital Input Expander.