The DVI-EDID-EMLTR-LC Low-Cost DVI EDID Emulator simulates the presence of an attached DVI display to a DVI video source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz. When used with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired DVI display will be copied and stored to the emulator.
The DVI-EDID-EMLTR-LC Low-Cost DVI EDID Emulator simulates the presence of an attached DVI display to a DVI video source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz. When used with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired DVI display will be copied and stored to the emulator.
- Emulates an DVI display (sink device) by providing Hot Plug Detect and EDID to the DVI source device.
- Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
-
Dual link resolutions up to 2560x1600 (WQXGA) supported - requires EDID-REC-VDH EDID Recorder (sold separately) to program dual link resolutions to the emulator.
- Supports Emulation and Learning modes.
- Emulation mode: provides EDID to the DVI source device from the emulator's internal memory.
- Supports headless operation - no monitor attached to source.
- The selectable resolutions are dependent on the computer's graphic card.
- Only DVI-EDID-EMLTR-LC is necessary for this function.
- Learning mode requires EDID-REC-VDH EDID Recorder (sold separately): store a display's EDID for later use.
- Pre-programmed with many standard resolutions with native set to 1920x1080@60Hz.
- Requires EDID-REC-VDH EDID Recorder (sold separately) to program other resolutions to the emulator.
- LED indicators provide signal status information.
- Ideal for resolving signal handshaking problems between a source and a display.
- Ensures that the EDID is not lost in connections between devices such as switches, splitters, and extenders.