Environment Monitoring System Spot Leak Detection Sensors
Liquid, Water & Chemical Detection Sensors compatible with E-2D, E-5D and E-16D
Spot Leak Detectors
Spot Liquid Detector, Point Leak Detection Sensor
E-LD-SPDT
For detecting water presence and warning of flooding.
Features gold-plated probes and microchip technology for dependable detection of conductive liquids.
SPDT alarm contacts
Weatherproof enclosure
LEDs for power and alarm indication
Ideal solution for sensing leaks under a raised computer floor or air conditioning drip pans.
Use in large-scale network control centers, data centers, server rooms/closets, unattended remote shelters, mechanical equipment rooms, sensitive areas with overhead piping, industrial process control rooms, etc.
Adjustable detection level.
Probe height adjustable 0" to 1.5" (0 to 38mm)
Current consumption: 10mA typical, 30mA maximum @ 12VDC.
Maximum cable length: 1000 ft (305m)
Dimensions WxDxH: 3.75x4.5x4.23 in (95x114x107 mm)
Spot Liquid Detector with Built-In Visual & Audible Alarm
E-SLDO-A
Use to detect conductive fluids in confined areas
Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas.
Water level detection range: 0.03 to 0.53" (0.79 to 13 mm).
DPDT alarm contacts.
Audible alarm signal: 85 dB at 1 foot distance.
Red LED for visual alarm signal.
Green LED for power
Current consumption: 30mA typical, 85mA maximum @ 12VDC.
Dimensions WxDxH: 2x4.13x0.19 in (51x105x30 mm).
Includes adjustable mounting bracket attached via adhesive strips or two screws.
Place the sensor on a flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, or electrical switchgear rooms and other potential leakage areas.
Water level detection range: 0.03 to 0.53" (0.79 to 13 mm).
DPDT alarm contacts.
Red LED for visual alarm signal.
Green LED for power
Current consumption: 30mA typical, 85mA maximum @ 12VDC.
Dimensions WxDxH: 2x4.13x0.19 in (51x105x30 mm).
Includes adjustable mounting bracket attached via adhesive strips or two screws.
Use to detect oil or non-conductive liquids in outdoor locations or in areas that are susceptible to leaks.
The sensor includes two liquid detectors; one looking for conductive liquids (e.g. water), and the other looking for non-conductive liquids (e.g. fuel oil, diesel fuel).
When there is no water but oil/non-conductive liquid present, an alarm will trigger.
If there is water present but no existing non-conductive liquid leak alarm, the sensor will not activate until the water is removed.
Refer to the datasheet for further details on the conductive and non-conductive detection interaction.