1-Wire Environment Monitoring System Sensor Manuals
Sensors & accessories compatible with E-1W
To find installation instructions for a specific sensor, select the associated manual link from the chart below. While some of the sensors listed below plug into the RJ11 “1W Sensor” ports on the E-1W(P), most of these will connect to the “Digital In” terminals. The diagrams provided indicate how connections are made to “Digital In” terminals on other ENVIROMUX models. The same connection methods hold true for the E-1W(P) as directed on page 5 of the E-1W(P) manual.
| NTI# | Description | Manual # |
|---|---|---|
| E-AFM | Air Flow Monitor | MAN169 |
| E-CMD-P | Carbon Monoxide Detector | MAN056 |
| E-DI2-1W | Digital Input Expander | MAN258 |
| E-DCSR | Rugged Door Contact Sensor | MAN251 |
| E-EBS | Emergency Button | MAN057 |
| E-GBS-P | Glass Break Sensor | MAN056 |
| E-GD-MBP-P | Gas Detector | MAN165 |
| E-H2-P | Hydrogen Gas Detector | MAN236 |
| E-IMD-CMP | Ceiling Mount Motion Detector | MAN056 |
| E-IMD-LCP | Infrared Motion Detector | MAN238 |
| E-IMD-TAA-P | TAA approved Motion Sensor | MAN056 |
| E-LD-SPDT-P | Liquid Detector-SPDT Contacts | MAN167 |
| E-LDx-y | Liquid Detection Sensor | MAN057 |
| E-M-DCS | Door Contact Sensor | MAN057 |
| E-SDS-120V | Wired Smoke Detector | MAN180 |
| E-SDS-CELCP | Wired Smoke Detector for E-MICRO | MAN241 |
| E-SDS-TAA-P | Smoke Detection Sensor-TAA | MAN206 |
| E-SLDO-14 | Spot Leak Detector | MAN173 |
| E-SLDO-AP | Spot Leak Detector w/ Alarm | MAN170 |
| E-T1W-1M | Temperature Sensor | MAN259 |
| E-TCK1W-7 | K-Type Thermocouple-to-1-wire Converter | MAN259 |
| E-TCKS-752 | K-Type Thermocouple Temperature Sensor | MAN259 |
| E-TCKS-1382 | K-Type Thermocouple Wide-Range Temperature Sensor | MAN259 |
| E-TDS | Tamper Switch | MAN057 |
| E-TH1W-7 | Temperature/Humidity/Dew point Sensor | MAN259 |
Network Technologies Inc |
 |
